LargeScaleForums - Your Large Scale RC Neighborhood

LargeScaleForums - Your Large Scale RC Neighborhood http://www.largescaleforums.com/forum en Fri, 04 Jul 2008 17:36:33 GMT vBulletin 60 http://www.largescaleforums.com/forum/images/cyclic/misc/rss.jpg LargeScaleForums - Your Large Scale RC Neighborhood http://www.largescaleforums.com/forum FHMT and Beetle Body http://www.largescaleforums.com/forum/showthread.php?t=2840&goto=newpost Fri, 04 Jul 2008 16:41:21 GMT Well, I painted it and finally have it mounted. Some of the mounting is rigged to say the least....I'll eventually see how it stands up to abuse. I didn't want to pull that giant front bumper off the front, so the wheel wells in the front sit high and back a bit further. I guess I can always trim the rear wells up sometime. Oh well, next large scale is going to be an MB Pro so I'll just be happy with this until then! :)

I was inspired by Moosey at Tamiya101.com with this Sand Scorcher.

]]> XTM/Firehammer/Carson csp1971 http://www.largescaleforums.com/forum/showthread.php?t=2840 FG MT Handling http://www.largescaleforums.com/forum/showthread.php?t=2839&goto=newpost Fri, 04 Jul 2008 11:26:33 GMT Does anyone know how to improve the handling of a FG MT??? the weight distribution, camber, toe, ride hight, shocks, springs, anything to kill the... Does anyone know how to improve the handling of a FG MT???

the weight distribution, camber, toe, ride hight, shocks, springs, anything to kill the understeer.... ]]> FG Monster Truck Phon007 http://www.largescaleforums.com/forum/showthread.php?t=2839 Missing a Trick?? http://www.largescaleforums.com/forum/showthread.php?t=2838&goto=newpost Wed, 02 Jul 2008 20:43:16 GMT Was just scanning a few videos on Youtube, and came across this vid (there are others as well) http://www.youtube.com/watch?v=u-4HGKCU3IU How is it... Was just scanning a few videos on Youtube, and came across this vid (there are others as well)

http://www.youtube.com/watch?v=u-4HGKCU3IU

How is it that when they do the jumps, and the truck looks like it is gonna do a back flip and wipe out, it suddenly flicks forward and lands on its wheels!!

Mine lands on its back gives up falls apart, and costs me loads to repair/replace:( ]]> XTM/Firehammer/Carson MKB http://www.largescaleforums.com/forum/showthread.php?t=2838 Baja for sale with extras. http://www.largescaleforums.com/forum/showthread.php?t=2837&goto=newpost Wed, 02 Jul 2008 19:43:46 GMT Baja with a Zenoah red cap G260RC- 1/2 tank thru it. Will come with the following items (All used unless stated otherwise) Servos- ACE DS1015 Hitec... Baja with a Zenoah red cap G260RC- 1/2 tank thru it. Will come with the following items (All used unless stated otherwise)
Servos-
ACE DS1015
Hitec HSR5995TG
Hitec 805BB
JPV3 tuned pipe
Modifier Fuel Tank
Modifier clutch cover
Alum. Clutch carrier w/ bearing
Alum. rear eng. mount
Integy disc brakes-NEW but not in the original package
Elcon clutch, 1.5 gallons of use on it.
Rebuilt 23cc Zen/CY engine REED ported w/ ONB cylinder reed and carb.(Recommend rebuilding with new factory gaskets)
React 2.4 radio will come with a brand new V2 transceiver-Will be here in a week or 2.(Will transfer registration to the new owner after the sale)
NIB factory unpainted body

There's probably a few things I missed, it will need minor thing like body mounts, and possibly a few screws.
I also have quite a bit of extra arms and some other prats as well that are not shown.
Take a good look at the pics, as you can see there are'nt many scratches if any on it. I ran it for 1/2 a tank on pavement and put it away. And worked on my other Baja. I paid $1000 for it (Box stock, locally for it)

Will not be parting it out.

I am unemployed ATM and need some funds.
Trades because people always ask. Only trades considered would be for 1/4 scale Yankee or a 4X4 name brand large scale.

I did some calculations and it came up pretty high so I don't want to scare anyone off.
Will entertain serious and reasonable best offers.

I accept PayPal and will also do USPS Money orders ONLY shipped USPS flat rate w/ delivery confirmation.( Sorry 1st. class is not a reliable way to send M.O.'s)

Will ship practically anywhere in the world at the Buyers expense, will not be held liable once it has been shipped.-Delivery confirmation and tracking are mandatory. All customs, fees, and wait time outside of the USA are the buyers responsibility.
If you would like to calculate the shipping costs from your end. Here is the zip code it will ship from.-96797

Attached Images

	t-shirt 010 (Small).jpg (36.8 KB)
	t-shirt 011 (Small).jpg (44.7 KB)
	t-shirt 012 (Small).jpg (41.7 KB)
	t-shirt 013 (Small).jpg (40.8 KB)
	t-shirt 014 (Small).jpg (42.1 KB)

]]> Market Place IMADMAN http://www.largescaleforums.com/forum/showthread.php?t=2837 Seal the drilled hole in FG MT wheel http://www.largescaleforums.com/forum/showthread.php?t=2836&goto=newpost Wed, 02 Jul 2008 18:45:20 GMT You know how some people drill a hole in the wheel so that water can get out of the tires. Well, I have the oposite scenario: I now don't like the drilled hole in each wheel. What's the best way to seal that hole? Put solder in the hole?

Any idea is appreciated. ]]> General Large Scale RC cub2000 http://www.largescaleforums.com/forum/showthread.php?t=2836 Phatdad-rc and Turtleracing Ultimate suspension upgrade kit. http://www.largescaleforums.com/forum/showthread.php?t=2835&goto=newpost Wed, 02 Jul 2008 18:17:17 GMT Coming soon.:celebrate: Coming soon.:celebrate: ]]> Redcat Racing Rampage phatdad http://www.largescaleforums.com/forum/showthread.php?t=2835 Shop Closeout- selling everything left http://www.largescaleforums.com/forum/showthread.php?t=2834&goto=newpost Wed, 02 Jul 2008 12:26:20 GMT Since we transferred Elcon to Daves Motors- we need to clean out the remaining inventory we have left. All items are on a first come first serve... Since we transferred Elcon to Daves Motors- we need to clean out the remaining inventory we have left. All items are on a first come first serve basis. Shipping is included in all the prices to the lower 48 states only. Prices are firm and we are not accepting any trades at all:

FG STUFF:
PART# DESCRIPTION PRICE EACH
1x 06480 Alloy shock set for buggys $100.00
2x 06510/30 2000 Wt shock oil $ 5.00
1x 04421/5 Torx screw driver $ 9.00
1x 06295 Wheelie bar $ 75.00
1x 07430/20 20 tooth steel gear $ 18.00
2x 06080 dog bones $ 9.00
3x 06432/02 19 tooth steel gear $ 23.00
1x 06183 monster truck side plate $ 40.00
1x 06640 FG pit/tool box $100.00
1x monster truck/beetle shock parts lot $ 50.00
2x Carson knobby tires on chrom rims fg square $ 55.00 pair
2x DLD tires and rims 1 orange 1 white $ 50.00 pair
1x King Cobra bling blaster pipe $125.00
1x onroad tire lot- 24 pairs of tire nib $200.00
1x Monster ideas receiver mount $ 12.00
3x Monster ideas wing mount supports $ 10.00
2x Monster ideas diff gear protector $ 15.00
1x Monster ideas steel roll cage struts $ 25.00
1x KP Designs alloy radio plate for marder and multiplex servo $40.00
1x KP designs alloy radio plate for leopard/onroads and multiplex servo $40.00
1x FS D&D K&N like filter $25.00
1x Elcon alloy servo saver #18410 $30.00
1x FG used 2 piece pipe for off-roads $100.00
1x FG complete stock filter kit $ 30.00

SERVOS AND ELECTRONICS

1x Hitec 805BB servo $ 30.00
1x hitec hs-945-MG servo $ 50.00
3x Vs 3300 mah 6 volt battery $ 30.00
1x hitec agrssor srx radio and receiver $ 90.00
1x superbrain 960 charger $50.00
1x Nomadio sensor tach meter $15.00
1x Nomadio temp sensor $15.00
2x tony hawk helmet cam $25.00

MCD PARTS

2x racerunner rims silver -pair $ 35.00
1x racrunner rear wing - black $ 33.00
1x MCD 2000mah battery $ 25.00
5x Alloy lower shock forks - pair $ 15.00
1x wingmount for racerunner-pair $ 18.00

HPI BAJA PARTS

1x custom painted baja body $ 80.00
1x RC4WD alloy rims full set $260.00
1x pair elcon black rims and fg tires/foams $100.00
1x HPI Baja body- clear $ 25.00
2x 4848 dirtbuster front mediums/no foams $ 28.00
1x 336 led light kit $100.00
1x 3229 Hpi chrome rear rims $ 25.00
2x 3271 HPI HD Bead locks black $ 12.00

All items are brand new except the fg pipe that is listed as used. Pictures are located here:

http://s212.photobucket.com/albums/c...c/shopsellout/

The titles will be filled in soon. PM me or reply to the thread if you are interested in anything. Everything is a first come first serve. We will accept paypal (pay 1.5% fees). I will keep the main page updated with what is sold and what is not sold. ]]> Market Place Large Scale Alloy http://www.largescaleforums.com/forum/showthread.php?t=2834 Monster Truck - no drive http://www.largescaleforums.com/forum/showthread.php?t=2833&goto=newpost Wed, 02 Jul 2008 11:01:57 GMT Have acquired a Monster Truck, which was in need of some repairs, as part payment of a debt. It was in dire need of some TLC after hitting a tree... Have acquired a Monster Truck, which was in need of some repairs, as part payment of a debt. It was in dire need of some TLC after hitting a tree stump at some speed by the previous owner. After replacing the obvious missing or broken parts(mostly at the rear end) was sadly disappointed that it still doesn't go. Engine starts fine and revs increase as I would expect, but no dirve to the wheels. Any ideas what to look for now.

Bruce ]]> FG Monster Truck bruce.c http://www.largescaleforums.com/forum/showthread.php?t=2833 Post Your Redcat Pictures Here! http://www.largescaleforums.com/forum/showthread.php?t=2832&goto=newpost Wed, 02 Jul 2008 10:40:53 GMT I got mine and already ordered some goodies for it: Blue x-can custom painted asgard body Zenoah 27CC engine. Have not installed anything yet but... I got mine and already ordered some goodies for it:
Blue x-can
custom painted asgard body
Zenoah 27CC engine.

Have not installed anything yet but put the body on top to see what it will look like:

]]> Redcat Racing Rampage fgbasher http://www.largescaleforums.com/forum/showthread.php?t=2832 futaba 3pm http://www.largescaleforums.com/forum/showthread.php?t=2831&goto=newpost Tue, 01 Jul 2008 20:41:27 GMT can anybody tell me anything about the futaba 3pm radio with the fast 2.4 system? thx Dirby can anybody tell me anything about the
futaba 3pm radio with the fast 2.4 system?
thx Dirby ]]> General Large Scale RC dirby http://www.largescaleforums.com/forum/showthread.php?t=2831 mcd monster truck for sale http://www.largescaleforums.com/forum/showthread.php?t=2830&goto=newpost Tue, 01 Jul 2008 18:18:47 GMT this is my mcd monster truck for sale, it has a 28.5cc engine, 2 jet pro pipes (silenced and unsilenced), shockwears, and a outerwears on air filter... this is my mcd monster truck for sale, it has a 28.5cc engine, 2 jet pro pipes (silenced and unsilenced), shockwears, and a outerwears on air filter and pullstart. It has twin hitec servos for steering and one for throttle and brake. I've put steel gears where i can plus i have extra plastic gears new in bag. I have run 3 tanks of fuel through engine, body and chasiss have normal sratches on them from off road use. This is a awesome truck, I've gotten into racing so i don't drive this much anymore. The only thing not included is the reciever or the battery charger. I'm asking 1650.00 if interested please feel free to email me at piotrowiczshawn@yahoo.com. thanks for looking!!!

Attached Images

005.jpg (77.9 KB)

]]> Market Place pete379 http://www.largescaleforums.com/forum/showthread.php?t=2830 Loctite on exaust screws? http://www.largescaleforums.com/forum/showthread.php?t=2829&goto=newpost Tue, 01 Jul 2008 18:06:04 GMT I have the DDM pipe on my FHMT and the screws keep coming loose. Ok to loctite them? I have the DDM pipe on my FHMT and the screws keep coming loose. Ok to loctite them? ]]> XTM/Firehammer/Carson jjdurrant http://www.largescaleforums.com/forum/showthread.php?t=2829 WTB: fg stadium truck wheels and tires http://www.largescaleforums.com/forum/showthread.php?t=2828&goto=newpost Tue, 01 Jul 2008 17:23:42 GMT looking for some fg stadium truck wheels. send pics of what you got and we can go from there. thanks:) looking for some fg stadium truck wheels. send pics of what you got and we can go from there. thanks:) ]]> Market Place mcmead10 http://www.largescaleforums.com/forum/showthread.php?t=2828 MCD RaceRunner Evo III for sale http://www.largescaleforums.com/forum/showthread.php?t=2827&goto=newpost Tue, 01 Jul 2008 04:53:10 GMT I am selling one of my 2 newerish MCD Race Runners- Image: http://i245.photobucket.com/albums/gg59/DarkSoulracing/mcd1.jpg It has the... I am selling one of my 2 newerish MCD Race Runners-

It has the following-

-DS 26cc CY Marine top end with the DS billet shell
-X-Can
-3 HiTec 5745 servos (will sell with or without)
-Inboard dogbone boots
-spare set of taller gearing (still in bag)

It is a little dirtier than in the picture and the body of course has the typical scratches and dings associated with an offroad car, but is otherwise in very good shape. The engine probably only has 2-3 tanks run through it.

Asking $1200 shipped inside the lower 48 USA with the servos, or $1100 without. Outside the USA, I will ship, but you are responsible for actual shipping charges, and all duties or whatever. It must be insured for the full retail value as well.

I will get it all cleaned up, and some current pictures up in the next few days.

If you are interested, shoot me an email at ted@darksoulracing.com ]]> Market Place DarkSoul http://www.largescaleforums.com/forum/showthread.php?t=2827 Bargin , Bargin, Nib 1/5 Mcd Clone 4x4 Mt http://www.largescaleforums.com/forum/showthread.php?t=2826&goto=newpost Mon, 30 Jun 2008 18:36:58 GMT i have a brand nib fs racing 4wd king kong mt w/ 30cc engine, nib hitec lynx 3-d radio system,, and 1100 pack,w/ new in packs extras . bargin,... i have a brand nib fs racing 4wd king kong mt w/ 30cc engine, nib hitec lynx 3-d radio system,, and 1100 pack,w/ new in packs extras . bargin, bargin, ...deal of the century!!!!!! TO LOWER 48 ONLY,, sell $800.00 SHIPPED,...you wont find a deal like this again, this truck is the mcd 4x4 mt clone, which most of the parts will interchange, this is the biggest, baddest truck in the world, litterly, get it now , and be the biggest around,..asharlow@aol.com ]]> Market Place pullerman52 http://www.largescaleforums.com/forum/showthread.php?t=2826