Killer RC has updated their extremely popular kill switch and with the update comes a new name, the SUPER Bee Kill Switch!

For starters, the Super Bee kill switch now works with most all R/C radios - no more is there a need for multiple versions of the kill switch and no more confusion trying to figure out which one to buy. The Super Bee kill switch also adds the option to add dual ignition contacts for those running dual engines! Killer RC also added data logging which you simply plug the Super Bee into your USB port and the Super Bee kill switch will show the two different temp sensors, radio glitches, and battery voltage.

Click to continue →

All Losi 5ive owners take note of Losi's latest product bulletin regarding the front skid plate screws.

It has come to our attention that a small quantity of the 5IVE-T trucks were assembled with a shorter than correct length screw to attach the front gear box/skid plate. Before operating your 5IVE-T please remove and check the two front most 6mm flathead screws from the bottom of the chassis and confirm they are 3/4" (20mm) long. If they are not please call Losi Service at (909) 390-9595 Ext. 300 and you will be sent the longer screws. Under no circumstances should you operate the 5IVE-T with the shorter screws. We apologize for this error and thank you for your help correcting it.

Click to continue →

MCD Racing has released some photo's of up and coming large scale short course truck, the MCD W5! Not much has been released by MCD Racing at this point other than the MCD W5 will ship with large 190mm off-road tires from Xross Mass. MCD says the W5 will be released soon, we'll provide more details as they are released. Some teaser photo's are available after the break.

Click to continue →

After months of speculation and rumors, it's finally here - the newest large scale RC, the Losi 5ive-T 4WD large scale truck!

The 1/5-scale Losi 5IVE-T 4WD large scale RC truck is the closest thing to a full-size vehicle in realism, performance and experience. It features a 4WD drivetrain based on the racing-winning, award winning 8IGHT platfrom, Spektrum telemetry receiver, installed sensors, and 1/4-scale servos. And since it's a Bind-N-Drive vehicle, you complete it with the DSM transmitter of your choice.

Click to continue →

The new Futaba S3306MG Metal Gear Servo is designed to stand up to the rigors of 1/5th scale racing. The Futaba S3306MG is a 3-pole, water protected servo, equipped with many of the features racers want most, including dual bearings, high torque output (at 6.0V, it delivers a powerful 333 oz – in. torque) and high speed (0.16 sec./60°).

Click to continue →

RPM Racing's new HPI Baja 5B light pod mounts are sold in pairs to allow up to four HPI light pods (not included) to be mounted to an RPM Front Bumper (sold separately) with two pods affixed to each mount. With their modular design, they are the first and only fully adjustable pod mounts available today. Each pair of RPM light pod mounts can be adjusted individually for both left to right as well as up and down settings.

Click to continue →