What Silenced pipe for fm 32cc motor

I would look at the DDM Dominator with silencer and bracket.

Vrc silenced big bore. Good low / mid and high rev.

Thanks kingmotorusa. It is between the vrc and bartalone at this point. Looks like obr uses vrc for there testing and tuning.

I've talked to Sean severs times about this. They sent engines to VRC to develop a good all around pipe. That's why I went with the VRC. I'm going to put a Bartolone on my next rig. The vrc also fits tighter to the truck and allows you to still work on the brakes if needed. Plus the head coupling is closer to the engine which allows more room without taking the header all the way off.

Whoops *several

Decision made. Vrc. Thanks for your help!

No problem. Send some pics and let us know how it works for you.

Are you running the 990 carb?

no I don't think so. Stock carb with the Zenoah g32. just ordered the pipe from DDM today!!

I like the performance of the 990. I had to port my intake manifold to match it with the intake an carb. I know the stock manifold is like that with all of them. Not sure on the 32 because it has a different shape intake. I do the same on the exhaust. I push a piece of paper on both to etch the shape and cut it out. Then I use the as a template to match everything and see if any material needs trimmed off the gaskets, manifold, and exhaust pipe manifold. Every engine has their own port shapes, so I always do that to ensure the most performance.

I use a dremel with a cylinder shaped cutting bit.

Do you have a picture of the demel tool you used? I tried a fine file being careful not to rip the gaskets but it didn't work so well.

Got a change to test vrc big bore. Sounds awesome and no complaints of noise

RcVT84 said:

Got a change to test vrc big bore. Sounds awesome and no complaints of noise

Click to expand...

kingmotorusa said:

Click to expand...

It's a tungsten carbide cutting bit.