Raminator Build

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.
Not as far as I know. At least detroit doesn't. They haven't since the 90s. I cant speak to something like a ship engine. But as far as what most of you would consider big, nope.
You're probably correct with all the EPA rules in place now. Couple guys on you tube buy the old ones and let them run away till they pop. Its very satisfying to watch.
 
Well ,,,,, so much for my raminator build , I'm sending the crap back , can't take this crap anymore , very sad , but I'm done , all of a sudden rcmax is very appealing , I'll have to save for a while but at least I have a finish day in sight after I get it , wich would be the same day ,,,, believe me !!
The raminator or the tmr engine? Obr’s engine looks like it will be very strong when it comes out
 
I guess you don't know what's going on.
Bartalone was looking for someone to lend him a primal rc with tmr engine,so he can build pipes for them.
What most don't know these engine builders help each out and don't see each other as competition.
The problem with getting the exhaust has zero to do with primal,I think it has to do with manufacturer / current situation issues.
Lately there's been so much BS thats going around in this hobby. It's starting to become ridiculous with people trying to start + spread crap because of jealously or their need for attention.
This is the fastest way to destroy this hobby and make people not want to be involved.
Like everything else in this world - there's always a few haters causing problems.
 
I guess you don't know what's going on.
Bartalone was looking for someone to lend him a primal rc with tmr engine,so he can build pipes for them.
What most don't know these engine builders help each out and don't see each other as competition.
The problem with getting the exhaust has zero to do with primal,I think it has to do with manufacturer / current situation issues.
Lately there's been so much BS thats going around in this hobby. It's starting to become ridiculous with people trying to start + spread crap because of jealously or their need for attention.
This is the fastest way to destroy this hobby and make people not want to be involved.
Like everything else in this world - there's always a few haters causing problems.
Rona has nothing to do with tmr sucking ass at delivering pipes. This guy has been waiting on this pipe before corona was an issue. His best bet is selling this motor and going for rcmax or waiting on bartolone to make the pipe.
 
I know he's been waiting.
What I am saying is it's not for lack of primal trying to get the pipe in.
There's more then Rona' causing issues.
Yeah it can make you look bad and cause further issues than intended. This sucks all around because it wasn't the result of purposeful lack of trying or lying on primals part.
(From what hear anyway)
No company wants to screw their clients on purpose.
They only have the word of their supply chain to go on for answers.
I have zero to do with the company but have been there when people want answers,and all you can say is what you've been told.
That's goes for any honest company anyway.
Believe me, NO one wants to lose money or recieve bad press- especially in these times.
Hopefully one way or another they'll make things right with their clients.
Bartalone trying to help them at least shows the community tries to help one another in times of hardship.
Good luck in which direction you choose.
(Honestly not sure why I replied, but I do know the frustration on both sides from previous experience.)
 
I know he's been waiting.
What I am saying is it's not for lack of primal trying to get the pipe in.
There's more then Rona' causing issues.
Yeah it can make you look bad and cause further issues than intended. This sucks all around because it wasn't the result of purposeful lack of trying or lying on primals part.
(From what hear anyway)
No company wants to screw their clients on purpose.
They only have the word of their supply chain to go on for answers.
I have zero to do with the company but have been there when people want answers,and all you can say is what you've been told.
That's goes for any honest company anyway.
Believe me, NO one wants to lose money or recieve bad press- especially in these times.
Hopefully one way or another they'll make things right with their clients.
Bartalone trying to help them at least shows the community tries to help one another in times of hardship.
Good luck in which direction you choose.
(Honestly not sure why I replied, but I do know the frustration on both sides from previous experience.)
You are right about it not being primals fault. But it's also not right that tmr promises dates and never supplies, and that they don't (according to relic) reply to emails and such .
 
At this point tmr is in damage control mode. I've had this happen when I worked at the machine shop already. Sometimes part sources just fall through. At any rate you lose business and normally take a while to get it back if you ever do.
 
O. K. , First off , I was tottaly encouraged to make this motor upgrade by PRIMAL RC , ,don't try to tell me they aren't responsible they lied to me several times , but once they had my money , it didn't matter , I'm screwed , ( for 5 months ! ) Don't think I don't know about this hobby I'm 62 years old and have this hobby for 30 years , I've been there and back , and when I get screwed for $3500 I get pissed off and the hobbiest and companies are gunna hear about it , that's what these forums are for , to keep us informed , I get the covid hold up and I believe the crap started 2 months before that ! For crap sakes !! And here's the primal RC killer !!!!! They are selling the tmr motor right now !!!!!!! Knowing of the pipe problems ,YOU READY TO PUT BLAME ON PRIMAL RC YET !!!! PATHETIC CRAP !!!! THAT being said , primal sent me a message to let me know the pipe is comeing soon , well I've been told that , and believe for the 6th time , he said he was sent a picture of the pipe being made ,I told him to send me the one in the picture for poop sakes !!! And yes tmr is mostly to blame , I've heard they have the flue , they had material hold ups and now covid , as they might believe is there biggest blame !!!! PERFECT !!! CREEPS !
 
I spoke to them through emails a few times and even inquired about stopping by the shop for Relic.They don't really seem prepared to do business on this scale.They don't have a physical location to visit at least not a showroom and the answers I was given in regards to when the parts would be made or delivered were very soon and that is not a good enough answer if money has exchanged hands.I am sure if one of us did a job for someone and they said well I will get you the money soon that wouldn't be a good enough answer either.I also owned a few businesses in my time and how do you sell something you are manufacturing if you haven't ironed material supply or manufacturing demands beforehand?
 
Did you pay for the pipe @Relic-1 or just the engine? If only the engine, then were you told the pipe was available when you purchased the engine or was you told the pipe was being made for the engine, but it will take a couple weeks/months because it was in prototype stage or something along those lines?
 
After selling my stock motor , I waited 2 months for the tmr motor , when I was told the motor would be available , the following week , after getting the motor , I was told 2 weeks I would have my pipe , this is what made me do the upgrade in the first place , no I haven't paid for the pipe yet ,but you have to understand I was ecouraged to do this from primal , Wich is something I've had good luck with all other projects in the RC hobby , I always study and investigate all my projects before starting them ,so like I've been saying , I've been lied to , misled , and frankly robbed , is how it feels to me , well like I said they have said soon AGAIN !! BUT HEY !! HES got a picture now ! I'm waiting out this jarga for two weeks , then anybody want to buy a$3500 shelf queen , cuz I will be giving up on this crap by then for sure , my brother in law is a state legislatures advising attorney , he can't wait to go after these fools
 
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock    No Thanks