TAYLOR RC 35cc

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.
Relic-1 said:
O. K. , From now on all 35 motor videos are banned , I'm gonna end up single n homeless , I'm odering a a new vekta 5 roller on Thursday , I'll get paid up on that then get me a 35 , and see if she doesn't sell my other cars by then 🥴🥵
Click to expand...
I would have sold you my vekta roller. Its brand new. Has like one 2 minute run on it..
 
Relic-1 said:
DAMIT !! , Sorry to I didn't know that , I talked with Mike again today , he says another month till engines are ready , he's recommended the rooster tail 990 or the full mod 1107 for a carberator for the 35 , you guys got any preferences on those ?
Click to expand...
1107 with the choke removed....
 
Trying to purchase a carb , what the hell is with this $20 shipping fee ? Dam to hung wieghs a ounce gask we ts less than that !! Where you guys shop for carbs , and thanx for the advise , and what's going on with ddm ? , I've called and messaged , I got no shipping e mail and no answers at all , there usually pretty good about that in returning info , covid stricken crew maybe ?
 
Last edited:
Well,,,,,, my powerless VEKTA5 Has arrived ! Now I'm waiting for what Mike told me would be the end of the month to get the 35 , ooooooh boyeeee !! Have I been here before , but I have a butt load of faith in Taylor rc , other than T.M.R. , I ordered the rooster tail carburator and high output gears so far , looking u to the intake choices now , this is gonna be fun , I'm be racing my brother and his friend is they both got losi 5's should be alot of fun n mudd slingn
 
I have never had to put in or take out a clutch on these things , I'm at the point of choosing a clutch for my Taylor rc 35 , VEKTA5 build , any suggestions is greatly appreciated , and welcome to our gift called MONDAY ! CY back plate ? As nd it sounds so l I'm me I'm looking at a 54 mill. Clutch ?
 
Last edited:
Relic-1 said:
I have never had to put in or take out a clutch on these things , I'm at the point of choosing a clutch for my Taylor rc 35 , VEKTA5 build , any suggestions is greatly appreciated , and welcome to our gift called MONDAY ! CY back plate ? As nd it sounds so l I'm me I'm looking at a 54 mill. Clutch ?
Click to expand...
On Mike Taylor's last video he explains our clutching options. Hope this helps👍
 
The clutch mount for the crank will be for zen or Cy. What are you looking for in a clutch ? DDM offers FS racing 54mm full metal clutch w 8k spring,
https://www.davesmotors.com/FS-Racing-54mm-Full-Metal-Clutch-Shoes-w-8K-RPM-Spring
Or
Detroit Performance offers sintered steel with more sprng options
https://www.detroitperformancerc.com/product-page/fs-sintered-steel-54mm-clutch
Or
62mm option, vertigo housing and the Vertigo clutchbell and transmission
I'll be yanking the 80 from my Vekta and installing a 35 so I'll be doing this ☝️
 
Relic-1 said:
I didn't want the metal clutch , I saw the clutch kit for the 54 mill , so gotta change everything to go with on the bigger clutch ? So I won't need this backing plate thing is on the VEKTA5 ?
Click to expand...
if you'tr gonna go with a 54mm clutch and the stock vekta bell relic then the taylor 35 needs either this,

https://www.davesmotors.com/CY-RC-54mm-Clutch-Plate-R225023020

or this,

https://www.davesmotors.com/1140-55310-Zenoah-54mm-Clutch-Plate,

then the 54mm clutch of your choice likle this cy clutch, but you need the correct bolts and washers ,
cy clutch uses the 9mm bolts, washers and belville washers,

https://www.davesmotors.com/CY-RC-54mm-Clutch-Shoe-and-Spring-Kit-9mm-bolt-hole-322-204905

or cy high response clutch,

https://www.davesmotors.com/15448CYHighResponseClutchShoeSpringSet8K

cy clutch bolt and washer set,

https://www.davesmotors.com/CY-Complete-Clutch-Kit-Replacement-Hardware

or zenoah clutch that uses 8mm bolts, washers and belville washers,

https://www.davesmotors.com/zenoah-54mm-clutch-shoe-and-spring-kit-8mm-hole-for-mount-bolts

zenoah clutch bolts and washer set,

https://www.davesmotors.com/Zenoah-Clutch-Replacement-Hardware-Kit

not sure why you're against an all steel fs clutch or similar,
@DougStar swears by em and i'm in the process of swapping all my 54mm clutches over to fs steel ones as they wear out :)
 
Once the metal on metal starts to heat up to they start to mess up , fray n stuff , is what I was told by a guy that's sposed tono these things , I'll start with to he regular for first off , so this back plate is dependant on the engine shaft size nevermind I just watched the ddm clutch video , plate is decided by what clutch I get , and bolts and washers to match what ever clutch I choose ? Did I get that ? Kinda felt like I did , but I've been getting some wired feelings anyways soooooo ,,,,, ???
Relic-1 said:
Once the metal on metal starts to heat up to they start to mess up , fray n stuff , is what I was told by a guy that's sposed tono these things , I'll start with to he regular for first off , so this back plate is dependant on the engine shaft size
Click to expand...
First time I came to this forum I asked for advice ,and I got it within a day , this is a great place to see how much I don't know 😵‍💫 , thanx Mr. City ? , Really , you were a great help , this is a great forum , thank you all !!
 
Last edited:
Back
Top
✖
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock    No Thanks