Search results

I took the kit off, I am just going to get a new engine so I don't have to mess aroung with this mess anymore, any suggestions on a sweet new engine would be great.

Could it be the pipe??

This is the big bore kit I got if that helps http://www.davesmotors.com/store/product105.html

Update, I took off the carb to check the gasket and it is possitioned rite. I also tried to start it by plugging the intake w/ my finger and it still would not start, although gas was coming out of the carb because my finger was wet. I also tried to pour fuel into the engine from the spark...

I will check the gasket, that could be a good possablity. I never would have thought of that!!:ph34r:

I tried putting on the stock carb and nothing. I am out of options, I might just take everything off and go back to stock, and throw the parts in the trash

Well It still won't start. I tried 1 turn out on the low speed and 1 and a half on the high, squeezed the throttle 3 times and nothing, could it be something regarding the big bore kit and ddm dominator pipe that I added. I am gettin pissed, I just want this bastard to start, It's still...

Thank's very much. Might I ask what settings you have the needles at??

I have the carb off and I am trying to prime it and no fuel is coming out.

1 and 3/4 out on the high and 1 and 1/4 on the low needle

This is the carb http://www.davesmotors.com/store/product2026.html

I bought the Wt-813 from ddm's site i installed it on my car and now it will not turn over. I took the carb off then tried to prime it and no fuel cam out at all, maybe a drop that's it. I was just wondering if anyone knew a solution for this. The engine is getting spark I checked it. Please...

Is it 3 hours I thought it was 2

Has anyone here ever tried to contact someone by phone at Dave's. I have tried to call them on a few occasions and there is never anyone there, during business hours of course. They have a great selection on there website but there phone support is by far the worst!!! Is is just me??

Thanks for the info, I really appreciate it.:)

I am putting in a new piston and crank and I can't figue out an easy way to get the flywheel or the little piece after the clutch that is on the crankshaft. Does anyone have any exper. with this, all the bolts are off but I can't get the flywheel off it's all stuck??

Does anyone here know of any tracks in the Rockford, IL area??

I wasn't aware of the top end of the Jet Pro, I was running in front of my house (to small of an area, mail boxes etc). I now have about 2 acres of bashing area so I think the Jet Pro might be a better fit. I will also be using it on the stock engine w/ the Walbro Wt-813 and a Z-rc tall...

I am looking at getting the Jet Pro unsilenced pipe, and I am also considering the DDM Dominator pipe. They seem to both be good at low and mid, but my only concern is justifing an extra fifty dollars for the Jet Pro. I would just like some different opinoins on the two. Not interested in a...