Search results

To be honest plug the holes with 4mm set screws and drill 5/64 inch holes about 1.9mm and fill with 35wt . use ddm hd springs. theirs plenty of other areas on the car that need more attention. I wouldn't wast my money on 5ive shocks. If you don't use shock limiters on the 5ive shocks you'll bend...

I don't know about you guys but I closed up the 4 holes with 4mm set screws and drilled 4 1.9mm holes I used a 5/64 drill bit and I'm running 35 wt losi shock oil with tge ddm springs I don't jump much so I layer the shocks down the upper shock in the inner most hole and the bottom in the...

I put in two hitec servos their better than stock with 15 t spline I got them for about 100 each I'm running a 6.5 hp motor and they seem fine the only problem I experienced was with the stock I couldn't find aluminum arms. And we're blowing the stock ones out since I got the 15 t I found...

I love my gas powered dbxl the thing is upgrading one is expensive. If your like me I love speed so out of the box it didn't work for me so I upgraded it to a 34cc Zenoah race ported stroked 6.25 hp motor. I didn't get a chance to put an exhaust on it yet. But with dgi 23/58 gearing it dose...

I bought a dbxl put a 600 motor in it regeared it and some other mods I don't even have an exhaust on it yet and I'm running 53 mph runs it gets their within 50ft and I get an Hr run time off one dgi tank..