- Messages
- 19
- Location
- Pennsylvania
Guys,
I posted this over at the large scale thread on HSF. I figured I'd come and post it here. I just took apart my shocks and gave them a much needed servicing and re-placed with new fluid. I had a leaker on the front and replaced with new shaft, cap, & seals. I also installed Team Fast Eddies bleeder shock caps. These are very nice and eliminate having to fill & bleed from the bottom. The shock that I repaired is retracting/compressing on its own when cycled it sucks back in. The other three came out perfect-nice and dead(little to no push out upon compression). I'm at a loss and input would be greatly appreciated!
I posted this over at the large scale thread on HSF. I figured I'd come and post it here. I just took apart my shocks and gave them a much needed servicing and re-placed with new fluid. I had a leaker on the front and replaced with new shaft, cap, & seals. I also installed Team Fast Eddies bleeder shock caps. These are very nice and eliminate having to fill & bleed from the bottom. The shock that I repaired is retracting/compressing on its own when cycled it sucks back in. The other three came out perfect-nice and dead(little to no push out upon compression). I'm at a loss and input would be greatly appreciated!
Last edited: