Hi Guys, anyone install the TFE battery box eliminator & the throttle/brake servo mount? care to show some pictures of your setup? was thinking to remove the stock battery box and use the two mounting plates for the servos required to operate the buggy. Do not intend to go electric and will stick to gas.
Eliminate stock battery box of baja 5B
- Thread starter Newman
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.
links, including eBay, Amazon, and others.
- Messages
- 1,810
https://www.largescaleforums.com/threads/carbon-sx5-build.27497/post-342062
Check this thread out. He is using the tfe box eliminator
John Parks
Print my own
- Messages
- 4,006
Yep. It's a bit customized from what most run but it's all available for purchase still. 
- Messages
- 1,810
You can leave them exposed. He did that to finish and clean it up.
John Parks
Print my own
- Messages
- 4,006
Looks cool…Any issue if i ommit the bonehead tray/cover and expose both the servos?
No you can do that, as portcity said I just did it to fill the void and to hold my battery.
- Messages
- 3,623
- Location
- Queens
So where does the battery go?
- Messages
- 13,105
Zed will show you....
- Messages
- 19,475
yea i got a new lipo powered vibrator last week
- Messages
- 2,044
- Location
- Long Island, New York
Ya know I wouldn't doubt that!
.
.
- Messages
- 19,475
i always tell the truthYa know I wouldn't doubt that!