engine wont fire

[twinmill571]

I have been trying to get my car started since yesterday. I was having issues with the kill be switch so i took it out. I know it ran 2 weeks ago but i installed TeamPhatDadrc ShreadStack so i could run the HPI filter. I got it all installed and it would even sound like it would fire so this morning i drained the gas went and got new gas mixed it up and nothing. I did install a new spark plug yesterday. I checked the plug was wet and it did have spark. So I need help please

 

[booggieman2u]

When you put the new stack on did you cover up the pulse port? That can cause it not to run

 

[Deluge1]

It's possible you could've flooded it. Pull the spark plug out and let it sit for a few hours and try again. If that doesn't help, here's a guide.

A Rough Guide To: Engine Starting Problems

 

[loud72]

I lost enough compression once buy having a leaky crankcase bearing seal.... caused the same symptoms you're having.... Just an FYI

 

[twinmill571]

got it running finally I do not know what i did I changed back to the old plug after it sat for a hour with the plug out and it fired up then died. After a few minor adjustments on the carb i got it running again. Now if i could just get my kill switch working that would be great I am going to try the flysky radio i have and see if i can get it to program.