Premium members don't see ads.Click hereto upgrade.

Factory/Standars carb settings for Zen23 marder.

Brucie

Active Member
Messages
34
Location
Northumberland UK
Hi all,

I've just gone to start my marder for the first time since getting it, but it wont start :censored:

Its got a good spark and its getting fuel, so I'm wondering if my mates kids have been tinkering with the carb settings while it was sitting at his place.

Does anyone know how to set it back to factory standard settings :confused:

Cheers,
Lee
 

Ozzy

Active Member
Messages
40
Location
uk
as stated by zenoah, the following should be the correct carb settings

H needle : 1 3/8 + or - 1/4
L needle : 1 1/4 + or - 1/4
 

Brucie

Active Member
Messages
34
Location
Northumberland UK
Thanks fella's

Set the carb as advised and fitted a standard exhaust.
Three pulls it tried to fire, one more pull and a tweak on the choke and hey presto she came to life :D

Now I need to get myself a failsafe and a kill switch ohh yea and a 2.4ghz tx-rx (When i can afford to that is)

Much appreciated,
Brucie.
as stated by zenoah, the following should be the correct carb settings

H needle : 1 3/8 + or - 1/4
L needle : 1 1/4 + or - 1/4
 

dwarfy

Well-Known Member
Messages
6,514
Location
Rossendale
There are a few decent 2.4ghz budget sets out there now. I bought a Code Core RC stick set (by Schumacher) for £85 and there is a new stick set out for £69 which looks identical in all but name. There are about 6 wheel sets to choose from with the Ansmann W3 for about £70 being popular on here. These all have built in fail safe settings.
 
Top