Register and gain access to Discussions, Reviews, Tech Tips, How to Articles, and much more - on the largest Large Scale RC community for RC enthusiasts that covers all aspects of the Large Scale RC!

Register Today It's free! This box will disappear once registered!

FG Monster Truck tutorials and how-to's

Discussion in 'FG Monster Truck / Beetle' started by WoodiE, Apr 12, 2007.

  1. WoodiE

    WoodiE Kind of good admin.
    Staff Member

    Joined:
    Feb 13, 2007
    Messages:
    1,653
    Likes Received:
    49
    Location:
    Kentucky
    Here is a collection of FG MT tutorials and how-to's, as we receive more we'll add it to this thread. You can also find these tutorials in our Articles link menu found above between the Gallery and Search links!

    DDM Dominator Mid-High Pipe review

    DDM Dominator Torque Pipe Install

    FG Monster Truck Grab Handle

    FG Monster Diff Sealing

    FG MT differential rebuild

    FG MT differential upgrade




    If you find these useful then please be sure to check out our sponsors found both in the article and in the right side of the forum. If you have a part or model you'd like to review or a tutorial/ how-to and have added to our Articles page please contact a member of the LSF staff.

    Thank you and Enjoy!
     
  2. ScooterTrash

    ScooterTrash Well-Known Member

    Joined:
    Feb 22, 2007
    Messages:
    84
    Likes Received:
    0
    Location:
    Santa Fe, Texas
    #2 ScooterTrash, Apr 14, 2007
    Last edited: May 31, 2007
  3. tizdaz

    tizdaz Well-Known Member

    Joined:
    Apr 29, 2008
    Messages:
    991
    Likes Received:
    0
    Location:
    chester | UK
    Another thing ive seen that helps with the stability of the FG MT's (this also includes MB Pro) is removing the rear anti-roll bar. It limits the travel of you rear suspension & also makes it MUCH stiffer. When i removed the rear roll bar on my MB Pro it made 1 heck of a difference & people i know who own MT's say the same :)

    However the front roll bar works great so leave that where it is!
     
  4. bucci

    bucci Member

    Joined:
    Oct 11, 2008
    Messages:
    12
    Likes Received:
    0
    Location:
    st pete fl.
    im gonna try that tizdaz today
     
  5. voo2doo

    voo2doo Moderator
    Staff Member

    Joined:
    Feb 11, 2009
    Messages:
    8,560
    Likes Received:
    25
    Location:
    Flintshire,North Wales
    What front roll bar? I bought mine new and it only had the rear bar.
    J.
     
  6. Ducky

    Ducky Well-Known Member

    Joined:
    Aug 9, 2008
    Messages:
    644
    Likes Received:
    0
    Location:
    Kent, UK
    I found without the rear ARB the truck pitches really bad....I fitted a thinner 4mm one from a Marder instead. I tried a front one but found all it really did was stop the front suspension working properly so removed it again.
     
  7. DreamState

    DreamState Well-Known Member

    Joined:
    Jun 9, 2010
    Messages:
    140
    Likes Received:
    0
    Location:
    Florida
    Most of those links come up "error 404 not found"
     
  8. Bigger the Better

    Bigger the Better LSF Plus Member
    PLUS member

    Joined:
    Feb 19, 2007
    Messages:
    7,738
    Likes Received:
    2
    Location:
    Minnesota
    Thanks, will look into it. If you see any issues like this make sure to hit the report post link in the bottom left and report the post. I got lucky and saw your reply.;)