Help getting mt pro started

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.
P

Paul4130

Junior Member
Messages
7
Reaction score
0
All stock, fuel lines correct, fuel in carb bubble, set needles at 1.5h and 1.25L. Pulls fine, nothing odd there. Just will not start. I've got other large scale, never had problem. Please, any suggestions would be great, I really want this thing running.
 
I just mixed new fuel. Even though I have others, I actually never checked or changed a plug yet. Stupid question, how do I check for spark?
 
Hold the plug along side the head pull the starer cord look at the tip you should get a nice blue spark. Check that your coil didnt come loose,the coil is right above the flywheel by the kill button under the engine cover.Vent the tank. Check your plug wire,and put in a new nkg 7 plug.
 
Paul4130 said:
All stock, fuel lines correct, fuel in carb bubble, set needles at 1.5h and 1.25L. Pulls fine, nothing odd there. Just will not start. I've got other large scale, never had problem. Please, any suggestions would be great, I really want this thing running.
Click to expand...
If you have spark, to be honest with you the stock carb sucks the big one, some work but I have had nothing but problems with the stock carbs!
 
Mine had a bad coil when I received the car new. It had a very weak dull orange/brown spark. I replaced the plug with the NGK and got NO spark. I bought a spark tester, and still was no visible spark. Finally went to Redcat and filed a warranty claim for a bad coil. They sent me a replacement and when I installed it, my car finally fired after a couple of pulls.

It's good to have a spark tester.

Hopefully you get yours sorted out. And oh yeah, I'm still using the OEM spark plug. I have no problems with it and save the NGK plug for later as a spare.
 
Thanks for all the suggestions and help, I finally got it started. Now I just need to tune it.
 
Back
Top