Killer bee kill switch

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.
S

SHOOTA0075

Junior Member
Messages
25
Reaction score
0
My new killer bee kill switch kills my engine just seconds after I start it. Works fine when I test it with the engine off. I have the stock 3 channel reciever and the stock 2 channel radio. Batterys fully charged. Any ideas??
 
Oh I've experienced a similar issue in the past and it was due to a bad flaky plug. Inside the spark plug's white ceramic portion is a resistor which maybe on its way out. Basically what's happening is the kill switch is sensing this ignition issue/glitch and shutting down the engine. Try replacing the plug with a new NGK brand one and see if that solves your problem. The NGK CMR7H plugs work well in large scale RCs. I'm not sure where you're located but you can pick one up for around $3 at any AutoZone.
 
ThankYou much friend. I bought one a few days ago, just have not had time to try it yet , been working so much and it's a bit cold here in Kentucky. I may try it this weekend
 
Back
Top