King Motor ksrc-001 Compatibility with hpi 5B

[Alphadog777]

Hello,
One quick question about King Motor and hpi.

How compatible are the parts between the two brands?

If I search for hpi parts how many of them would work on the King Motor car?

Thanks for the help!!

 

[PSH72]

Alll parts are compatible

 

[machine head]

I have a rovan sand rail. all of the parts are compatible. RPM,kIller rc , TR ,etc. Even king motors and rovan have good after market parts that are good quality and cheaper than the name brands. I replace everything.

 

[one2boost]

IIRC, gasser bob found the diff bearings were slightly larger, as it would not drop in the TR 3 piece aluminum trans case. He ended up grinding/sanding the outer diameter of the bearings until it fit.

 

[Alphadog777]

Ok thanks for the help guys!!

 

[machine head]

You need to purchase the TR case savers with the TR quick diff and it will accept the clone differential. I found out the had way too, cost another 80 bucks. But that whole diff assembly is bullet prof. Using 100 wt silicon oil with original drive cups. pumping out about 9 hp. A lot of this is trial and error, but everything else will fit.