Lipo receiver pack cutoff

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.
X

XJman

Well-Known Member
Messages
214
Reaction score
87
So I haven't had a large scale with servos that used more than 6v so this is my first step into using lipo for this purpose.

How do you set a low voltage cutoff? The dynamite Killswitch cuts off at 6v but that's a little low for a lipo. Are there other Killswitch options with more control of cutoff voltage?
 
XJman said:
So I haven't had a large scale with servos that used more than 6v so this is my first step into using lipo for this purpose.

How do you set a low voltage cutoff? The dynamite Killswitch cuts off at 6v but that's a little low for a lipo. Are there other Killswitch options with more control of cutoff voltage?
Click to expand...
I like using a receiver with telemetry so I can monitor battery voltage. I don’t know if there is a way to set lvc
 
Dirty30J said:
I like using a receiver with telemetry so I can monitor battery voltage. I don’t know if there is a way to set lvc
Click to expand...
If you are familiar does the flysky nb4 monitor it? I know that it has a receiver voltage thing but I never really thought about it. Is it checking that?

Also, what kind of battery life am I expecting on this. Hours or minutes?
 
I am not familiar with the flysky stuff but, yes reading battery voltage is all I do.
I use a turnigy 3000mah lipo and either run out of fuel or get bored of driving - so an hour or more. DDM has a great battery that fits the 5T/ 30 degree truck. I do t know what vehicle you are driving.
 
Dirty30J said:
I am not familiar with the flysky stuff but, yes reading battery voltage is all I do.
I use a turnigy 3000mah lipo and either run out of fuel or get bored of driving - so an hour or more. DDM has a great battery that fits the 5T/ 30 degree truck. I do t know what vehicle you are driving.
Click to expand...
Its going to be an MCD XR5 FT-R. I'm waiting to find out if the g320 bolts in or needs modified. I have a post here and cardinal racing sent back some really odd AI type response so I'm not sure whats up.
 
My raminator uses flysky radio and a lipo for servos. 4 servos, have ran truck 45 minutes and barely used up any power. Usually have to discharge during storage charge. I don't think you have any concerns unless your running electric motor.
 
XJman said:
Its going to be an MCD XR5 FT-R. I'm waiting to find out if the g320 bolts in or needs modified. I have a post here and cardinal racing sent back some really odd AI type response so I'm not sure whats up.
Click to expand...
I am pretty sure the zenoah will fit, and that will be one awesome car for sure. Don’t take my word for it though, maybe do some searching around the forum to find out.
 
Back
Top