Losi 5ive t conversion 2.0 to 1.0

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.
Clubin

Clubin

Well-Known Member
Build Thread Contributor
Messages
3,896
Reaction score
2,281
Location
Manitoba
I have the Taylor chassis.
Modified centre diff.
I have the phat dad v-1 front and rear shafts
I have a 55 in it now but that’s going into my vesla. I’m putting a 71 into the 5ive.

Too bad nobody makes centre drive shafts for the v2. Those would solve my problem.

Is there anything I’m missing?
 
gavsta72 said:
The driveshafts are only part of the problem with the 71. You also only have a 4mm pin on the diff pinion gear, and you can't upgrade the diff ring gears. Keep your wallet full of cash for constant driveline repairs
Click to expand...
Wait so there's no way to upgrade your 5T2.0 centre long driveshafts ?
 
Vitavon came out with an upgraded center shaft setup for the 2.0... my buddy is running it on a powerful brushless truck and it seems to be doing well. It doubles as a mount for the ESC and the chassis brace is connected to it so you wouldn't need those parts but the rest should work. Could maybe hit them up and see if they will sell it without esc mount parts.

https://www.ebay.com/itm/2850591207...Rfzzen7w1B+1IkrkM7FDNtWgxa|tkp:Bk9SR_SVhZ-8YQ
 
Back
Top