My Monster Beetle pro is now completely dismantled, to be built into a Monster Beetle pro XL.
This means that the length is extended by 5cm.
And the width increases by 2.4cm.
This is a picture of the car in standard format.
pictures of the 1 and other I will show you in the future.
Baseboard +5cm is arrived now and polished.
This project is built with different components such as:
Private construction components
Elcon parts
and a little par of FG parts
Not everything is arrived and ordered but that due course.
Whats arrived or is selfmade are:
Elcon diffbokken
Elcon vlinder
Elcon draag bevestiging rear
Elcon A voorbok
Elcon B voorbok
Elcon veerweg begrenser voorkant
Elcon servosaver
Elcon MT shocktower
Elcon XL aandrijfassen
JFC coolstuning enhanced Fuses.
Homemade xl reararms bottom
Homemade reararms above
Homemade radioplate
Homemade connection plate for A en B bulkhead (4mm)
Here are som pictures.
Extend baseboard(+5cm) with the originele.
Elcon rear.
Elcon front.
JFC front fusee's
radioplate homemade
new homemade connection plate for A en B bulkhead (4mm)
2 grams lighter than the original one!!
Elcon Stainless Steel shafts for mounting the wishbones.
Elcon MT shocktower
The homemade XL reararms
Smooth diffhuls.
Done on the spinbank.
Here my new reararms for the top of the rear.
More pictures are coming soon
This means that the length is extended by 5cm.
And the width increases by 2.4cm.
This is a picture of the car in standard format.
pictures of the 1 and other I will show you in the future.
Baseboard +5cm is arrived now and polished.
This project is built with different components such as:
Private construction components
Elcon parts
and a little par of FG parts
Not everything is arrived and ordered but that due course.
Whats arrived or is selfmade are:
Elcon diffbokken
Elcon vlinder
Elcon draag bevestiging rear
Elcon A voorbok
Elcon B voorbok
Elcon veerweg begrenser voorkant
Elcon servosaver
Elcon MT shocktower
Elcon XL aandrijfassen
JFC coolstuning enhanced Fuses.
Homemade xl reararms bottom
Homemade reararms above
Homemade radioplate
Homemade connection plate for A en B bulkhead (4mm)
Here are som pictures.
Extend baseboard(+5cm) with the originele.
Elcon rear.
Elcon front.
JFC front fusee's
radioplate homemade
new homemade connection plate for A en B bulkhead (4mm)
2 grams lighter than the original one!!
Elcon Stainless Steel shafts for mounting the wishbones.
Elcon MT shocktower
The homemade XL reararms
Smooth diffhuls.
Done on the spinbank.
Here my new reararms for the top of the rear.
More pictures are coming soon
Last edited: