I got the high torque throttle servo, 1/4 scale steering servo, and a fail safe receiver, first gear is metal 23cc Motor that has been completely reed ported by Oneill Brothers and on top of that is has a Oneill Brothers Reed Kit with a K & N filter The front body posts are aluminum this is wats on the truck right now wat kind of exhaust you guys think i should put i have it dwn for jetpro and ddm i don't now which of these need help and wat elese do u recomand
Okay Got My Fg Monster Truck
- Thread starter DOEBOY
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.
links, including eBay, Amazon, and others.
- Messages
- 2,828
- Location
- Manitoba
Congrats on the purchase. I am running the FG tuned pipe it is not bad. I have a RN pipe on order should be here soon.
- Messages
- 7,733
- Location
- Minnesota
I cant comment on the JP but I like my Dom.
- Thread starter
- #5
dom pipe has to be modfied to fit am i correct i have been looking into the old post and found a whole section on it but if you guys say its worth it i'll go for it it is much cheper then the jetpro once again you guys have a great site here :rockon: one more thing i want to make this a wheel king im also want to get the metal spur gear wat numbers do u recomeand 18/46 or somthing elese?
Last edited:
MONAROMAN
Well-Known Member
- Messages
- 485
- Location
- Sydney Australia
If you want to bash offroad and do lots of jumps I can only recommend the FG 2 piece pipe, I also have a dom torquer and the flex in the FG is very much suited to hardcore bashing.
Also if you wanna go offroad ditch the K&N filter, they are no good for offroad use and will let dirt through to the engine - heaps of people have toasted their engine with that filter, a good foam filter is what is needed.
Also if you wanna go offroad ditch the K&N filter, they are no good for offroad use and will let dirt through to the engine - heaps of people have toasted their engine with that filter, a good foam filter is what is needed.
sickboy
Well-Known Member
- Messages
- 919
- Location
- Netherlands
filters
that's very good info and if you want a good foam filter then i would suggest buy here they have got a full set for €50 http://www.pitstop-shop.nl/
hope thats helps
that's very good info and if you want a good foam filter then i would suggest buy here they have got a full set for €50 http://www.pitstop-shop.nl/
hope thats helps
- Thread starter
- #8
i have paypal were elese can i buy a foam filter i have the k&n with the dust cover but if you say that is no good can u give me another place to buy one in the usa i really aprcate the help im getting thank guys
- Messages
- 2,828
- Location
- Manitoba
These are the ones every one brags about.
Filters oiled http://www.davesmotors.com/store/product2525.html
Complete filter set http://www.davesmotors.com/store/product2370.html
Adaptor for Zenoah http://www.davesmotors.com/store/product2504.html
This is what my MB Pro has and this is the filter set I will put on my Baja 1000. In fact I have all of it already. LOL
- Messages
- 7,733
- Location
- Minnesota
I'm with the above but get a Redneck prefilter over that and then you may be able to wrap your outerwear filter over that. I've run the stock FG with the Redneck for years with out any problems.
- Thread starter
- #11
I have also ordered this pipe and I have now waited since January
No one nows when the will be delivered and everytime you mail the producer he says: They will be ready in about two weeks . Maybe I shuld go with the samba instead :blush:- Thread starter
- #13
I have also ordered this pipe and I have now waited since January
wat pipe is that the ddm or jetpro?
- Messages
- 7,733
- Location
- Minnesota
There talking about the RN pipe.
- Messages
- 2,828
- Location
- Manitoba
I was trying to get a RN pipe for 6 weeks, I gave up.