Post pictures of your 1/5 scale work stand

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.
@Stalle....

Many guys in the field use this style of stand as it's light, packs away in a small package, is easily transportable and multi adjustable so perfect for getting it level on rough ground.

Granted it's probably not the most robust work stand but it works.
 
BiggaJ said:
@Stalle....

Many guys in the field use this style of stand as it's light, packs away in a small package, is easily transportable and multi adjustable so perfect for getting it level on rough ground.

Granted it's probably not the most robust work stand but it works.
Click to expand...

I give it a try :)
 
76610_1626316691141_1033255980_1789103_1359727_n.jpg


thats the stand for my touring car. made out of pvc pipe with a couple pieces of steel pipe in some areas for added strength
 
yea, it works great. the upright is steel, and i had to weld another fitting onto it for the diagnol support. mine has a 4" upright and i had some problems with the 2 flat pieces breaking so i changed them to steel. my dad has the same stand with a 2" rise without any issues. and the top does rotate as well, its just pipe fittings so i can go a turn in either direction without an issue. overall, very cheap and easy to build. ive always got tables so a tabletop stand was the ideal thing
 
work stand

here are mine.....
hope i am doing this right.......

stands 002.webp

ebay (4).webp

ATTACH]7513[/ATTACH]
 

Attachments

  • stands 001.webp
    stands 001.webp
    35.2 KB · Views: 35
Outtaluck, what stand is that and where did you get it?

The stand I use for my Baja 5B is a Team FastEddy stand - I've seen a number of stands, but the TFE stand kicks ass. It's about as simple as they come yet extremely practical. Daves Motors sells them for $165 but if you use coupon code LSF you can save 5%.
 
WoodiE said:
Outtaluck, what stand is that and where did you get it?

The stand I use for my Baja 5B is a Team FastEddy stand - I've seen a number of stands, but the TFE stand kicks ass. It's about as simple as they come yet extremely practical. Daves Motors sells them for $165 but if you use coupon code LSF you can save 5%.
Click to expand...


Hey Woodie I did'nt buy it, i wish i knew who makes em so i could get one....

When i find out i will let you know;) and yes TFE does make a nice simple stand :)

Troy
 
I have the Ridged work stand that I modified where I can swivel it 360 degrees. I all so glued some real stick rubber to the top which does a good job of keep my 5b SS from falling off. I have about $40 in it. I like a stand that is not taking up room on my work bench or pit table.
DSCF2503.gif

DSCF2485.gif
 
That was it at its tidiest...You should see it now...lathe is covered in swarf ...bits of FG Baja everywhere...Bits of real cars and engines everywhere...

just as a workshop should be....lol...at least thats what I keep telling myself..
 
wezg said:
That was it at its tidiest...You should see it now...lathe is covered in swarf ...bits of FG Baja everywhere...Bits of real cars and engines everywhere...

just as a workshop should be....lol...at least thats what I keep telling myself..
Click to expand...


Its still probably cleaner than my garage :lol::lol:
 
Back
Top