Rear camber is off

[xenogears]

I recently received my DBXL-e 2.0 and the rear camber seemed off to me from the beginning. Looks pretty positive for the -1 it is suggested to be. I’ve checked the camber links and their lengths are what the factory suggested default should be. Any idea what I might be missing?

 

[misterleon]

try lowering the ride height if it’s still off adjust the camber links

 

[xenogears]

try lowering the ride height if it’s still off adjust the camber links

rear droop is at its lowest setting from factory. I can always adjust the camber link, but was wondering if I might be masking another issue by changing the factory defaults.

 

[21bangbang]

rear droop is at its lowest setting from factory. I can always adjust the camber link, but was wondering if I might be masking another issue by changing the factory defaults.

Factory is a starting point, not set in stone.

 

[misterleon]

So leave ride height and adjust the links. You can tear it apart and find what’s wrong but IMO it would be a waste of time

 

[xenogears]

Fair point guys. I did the obvious as everyone suggested and just set the camber using the links. Much better!