receiver battery ????

[the1320god]

so i already have a 5000 mah battery but there no more room in the receiver box and its a pain removing it all to charge. so im looking at some life batteries like this


http://www.rcplanet.com/Hobbico_6_6V_3200mAh_10C_Rx_p/hcam6445.htm


would this be good or is there something better? also ive read that the receiver can handle 6.6v but there a lot of nicer batteries that are 7.4v. im running the flysky gt3b radio and as rcdad put it wont handle it. so where do i find a voltage regulator and whats a good one? thanks for the help!

 

[Deluge1]

I've been doing research on this and it looks like the FlySky receiver can handle the 7.4v packs, and a lot of guys are running them without a BEC. The crawler guys use them to power accessories, like winch controllers, etc.

 

[Guest]

Killer RC has one for $50 but they are out of stock.

 

[Guest]

I have been afraid to try 7.4 but would like to here someone's experience in doing so. You need to make sure your servos can handle it. The factory servos no way.

 

[the1320god]

I have been afraid to try 7.4 but would like to here someone's experience in doing so. You need to make sure your servos can handle it. The factory servos no way.

well its nice to know the flysky can handle it... but it suck cuz im still on the factor servos...lol. what throttle servo are u guys using? im going to get the Hitec HS-5755MG for the steering, but don't know whats a good one for the gas?

 

[Guest]

I run the hitec 645.

http://www.davesmotors.com/s.nl/c.885035/n.1/it.A/id.2551/.f

This one is not a hi voltage servo. The 5755 can handle 7.4v

 

[the1320god]

I run the hitec 645.http://www.davesmotors.com/s.nl/c.885035/n.1/it.A/id.2551/.f

This one is not a hi voltage servo. The 5755 can handle 7.4v

where do u see what they voltage can handle? im seeing the power at 4.8v, but not a limit, that way i can find a servo for the throttle that can handle 7.4v.

 

[Guest]

Here is ratings on some of them.

http://servocity.com/html/hitec_servos.html

 

[the1320god]

im thinking this for throttle http://www.rcplanet.com/Hitec_Digital_Hi_Volt_p/hrc35685s.htm

and this for steering http://www.rcplanet.com/Hitec_HV_Digital_Metal_Gear_Giant_Servo_HS_5765MH_p/hrc35765s.htm

what ya think?

 

[Guest]

I've been doing research on this and it looks like the FlySky receiver can handle the 7.4v packs, and a lot of guys are running them without a BEC. The crawler guys use them to power accessories, like winch controllers, etc.

Did you find reviews or ratings?

This is what I find for the receivers.http://www.hobbypartz.com/fs-gtr3c-receiver.html

 

[Guest]

im thinking this for throttle http://www.rcplanet.com/Hitec_Digita.../hrc35685s.htmand this for steering http://www.rcplanet.com/Hitec_HV_Dig.../hrc35765s.htm

what ya think?

If the receiver can handle it, those servos would be great.

 

[Deluge1]

There are a few threads on RCTECH and RCCRAWLER.

FLYSKY GT3b Transmitter

Flysky GT3B receiver voltage?

 

[Guest]

^^^^ Thanks Deluge

 

[the1320god]

so im taking this as have an extra receiver on hand just encase... lol. im going to start piecing it all together, and ill let ya know how it turns out.

 

[Guest]

Cool you might beat me to it. I'm gonna give it a try also. It sounds like others have had success.