Shock mod .help

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.
R

rsgonzales

Well-Known Member
Messages
50
Reaction score
0
I feel the shock n well the springs are too stiff and shocks have very little dampning .I was thinking of drilling either one mote hole or enlarge the ones they have. As far as springs maybe hpi fronts in the rear .or what are you guys doing to improve the shocks.


Sent from my PG86100 using Tapatalk 2
 
Sorry I forgot to add what weight shock oil are u running.

Sent from my PG86100 using Tapatalk 2
 
This is for a xb with ss bearings .my gear plate .ol fart.hpi adapters using hpi front mini mx.hostile.all around center diff al supports and a cy 29 cc motor .

Sent from my PG86100 using Tapatalk 2
 
Deluge said:
I'm running 40wt, front and rear. I have an MT, though. You might want to try a heavier shock oil and adjust the preload.
Click to expand...
ok will do I don't want to scrap the stock shocks .ive got to take a good look at if it bottoming out or just bouncing up in the rear.someone with an xb has got to have a mod.Im going to expeiment.I guess.lol. I really thought the hpi tires would fix this stiffness problem as the xb sits low.either way Ive come a long way from when i first bought it.bearings seizeing up.tires falling off,engine hard to tune.990 carb fixed that.btw my hy engine was fine .hard to start but it ran i had a cy29cc.anyway im with the help of 7075rc and all the members here im getting there/
 
Back
Top