For my steering servo I’m going to get the 840 or 845 not sure which one of the top off my head tho, my question is what do I have to get to use a push pull style steering servo? Is that my best option when it come to steering my losi 5t right now it’s just the stock servo for steering and throttle.
Steering servo questions
- Thread starter Gunther
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.
links, including eBay, Amazon, and others.
- Messages
- 2,046
- Location
- Metro Detroit, Michigan
845 typically. I run 840 for throttle
gosha
Member
- Messages
- 17
- Location
- Thornhill, Ontario
If you have Facebook I asked the same question in this group https://www.facebook.com/groups/1416061885195295/?multi_permalinks=2769311686536968
- Messages
- 13,102
There's no reason you have to run push pull or dual servos. A decent single works just fine for most of us bashing.
- Messages
- 7,019
- Location
- Nj
fb is not about to spill over into this forum.
- Messages
- 2,798
- Location
- Manitoba
C$ 306.40 19％ Off | AGFRC A280BHMW A280BHLW 78KG 100KG 0.082Sec 5th Scale HV High Torque WP Brushless RC Racing Servo Large Aircraft Car Boat Model
https://a.aliexpress.com/_ms68gDy
$287 cad. Just ordered a couple more.
That’s for either a 78 or 100 kg. Plus the speed. Wow!
https://a.aliexpress.com/_ms68gDy
$287 cad. Just ordered a couple more.
That’s for either a 78 or 100 kg. Plus the speed. Wow!
gosha
Member
- Messages
- 17
- Location
- Thornhill, Ontario
- Messages
- 2,798
- Location
- Manitoba
gosha
Member
- Messages
- 17
- Location
- Thornhill, Ontario
Just wonder if there 5 times difference with this one for example? I see 3 extra BBs https://www.aliexpress.com/item/1005003439597673.html
- Messages
- 2,798
- Location
- Manitoba
That’s up to you.
There isn’t magic to the prices we pay. You for the most part get what you pay for.
There isn’t magic to the prices we pay. You for the most part get what you pay for.
gosha
Member
- Messages
- 17
- Location
- Thornhill, Ontario
Ordered one 100. Thanks guys for the advise.
gosha
Member
- Messages
- 17
- Location
- Thornhill, Ontario
It finally arrived... Will I be able to reuse stck servo arm?
Attachments
- Messages
- 2,798
- Location
- Manitoba
You bet. 15tooth. The agfrc is a better servo arm. It has clamp
Screws on it.
That servo is a work of art! I just installed one in a Xr5
Maybe a bit much but that’s ok.
Screws on it.
That servo is a work of art! I just installed one in a Xr5
Maybe a bit much but that’s ok.
gosha
Member
- Messages
- 17
- Location
- Thornhill, Ontario
Looks like stock one has clamp screw as well
Attachments
- Messages
- 2,798
- Location
- Manitoba
Totally up to you. You can run the stock servo horn
- Messages
- 40
For anyone interested, I recently installed one of these JX servos in my 5ive-T to replace an old S9020 that was failing.
It's a working servo, that's about all the good I can say about it. Brushed motor, cheap build quality, poor positioning/centering, exaggerated rating.
You get what you pay for!
However, I got it delivered next day for $50, and it's kept me bashing. So it's worth it IMO.