UKRC GPM Alloy parts

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.
CSR260

CSR260

Well-Known Member
Messages
3,252
Reaction score
3
Location
LiVeRpO0L uK :P
What is good about GPM products, are they good or bad?
The quality looks good.

What are your thoughts on the products?

Cheers
Andy :)
 

Attachments

  • bj027_siv_1.webp
    bj027_siv_1.webp
    8.6 KB · Views: 5
  • bj030_siv_1.webp
    bj030_siv_1.webp
    9.1 KB · Views: 4
  • bj315_siv_1.webp
    bj315_siv_1.webp
    9.6 KB · Views: 4
  • arm_siv_1.webp
    arm_siv_1.webp
    9.8 KB · Views: 5
Ive had a few bits off them (not for me Baja....yet) but for other cars ive had and the stuff was nice. I got no complaints. Reasonably priced too:clown:
 
Timmahh said:
GPM is another Integy from the best i can gather. parts are ok, but......
Click to expand...

but................................ ????? waitting Timmahh :clown:

The shock front and rear towers look beefy to me, the arm
set looks good but Id best stay with RPM.

If I was gonna change the arms Id go for FLM extended arms
or the FLM stock length ones.
 
but..... we all should know by now how i feel about inticrap. unless your new, then i ll elaborate.
they are, and always have been theives. cheap parts, with no aftermarket support. no race sponsors, no driver sponsors ect. they care only about one thing. putting your money into their bank account. thats it.
 
Timmahh said:
but..... we all should know by now how i feel about inticrap. unless your new, then i ll elaborate.
they are, and always have been theives. cheap parts, with no aftermarket support. no race sponsors, no driver sponsors ect. they care only about one thing. putting your money into their bank account. thats it.
Click to expand...

Fair point, thats what I wanted to know :blush:
 
I have been using GPM parts for mostly 1/18 scale cars. Like the others say: it is affordable and they it is good quality. BUT some parts won't fit without samll modifications due to large quantities productions.
I don't share Timmah's opinion: there are numerous manufacturers who doesn't sponsor directly. KFactory makes parts for mostly 1/10 and 1/8 nitro cars. They haven't, as far as I know, no drivers unless they are part of the factoryteam of Kyosho, Team Magic and some other manufacturers. RPM has also NO factorydrivers but only selling high quality parts!
 
CSR260 said:
What is good about GPM products, are they good or bad?
The quality looks good.

What are your thoughts on the products?

Cheers
Andy :)
Click to expand...
hi mate. I used all gpm stuff on my old hpi baja, thought it was good quality. It is only cheap because labor is cheap in china. Check the hpi baja in my album, to see what there stuff looks like fitted
.
 
everthing i,ve seen of there stuff has been good, who,s
arsed if they stack it high and sell it cheap, some people are on a budget and its stuff like this that keeps them running,
 
xxblindxx has a lot of gpm parts on his baja. they sent him proto stuff to test way back and he has never broken or bent any of them. he might be gunsmith here, or ghostlyrich... has a few forum usernames and I can't keep up. we bash together often
 
Back
Top