Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
you should be able to do that fella ,I want channel 2 only for throttle and channel 3 only for brake.
Thanks man! Keep you noticedyou should be able to do that fella ,
use channel mixing between ch 2 and ch 3, set the brake at zero on ch 2 then set ch 3 with zero towards the throttle side andhowever much you need towars the brake side, you will then get a smooth movement using the tx trigger from throttle to brake but on separate channels, with zero brake on ch 2 and brake on ch 3,
yeh it gets complicated but it does work ,
took me a few attempts for me to get it set up right but just take your time and keep going over the instruction book for channel mixing and you will get there,
Thanks man! Keep you noticed
It works!!you should be able to do that fella ,
use channel mixing between ch 2 and ch 3, set the brake at zero on ch 2 then set ch 3 with zero towards the throttle side andhowever much you need towars the brake side, you will then get a smooth movement using the tx trigger from throttle to brake but on separate channels, with zero brake on ch 2 and brake on ch 3,
yeh it gets complicated but it does work ,
took me a few attempts for me to get it set up right but just take your time and keep going over the instruction book for channel mixing and you will get there,
you're welcome fella ,It works!!
Register and gain access to Discussions, Reviews, Tech Tips, How to Articles, and much more - on the largest Large Scale RC community for RC enthusiasts that covers all aspects of the Large Scale RC!
Register Today It's free! This box will disappear once registered!
We get it, advertisements are annoying!
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.