twissted
Well-Known Member
- Messages
- 543
- Location
- Omak Washington
So what you will be seeing is the first build that has been posted of the RC4WD Untimate Toyota 1/5 Axles installed on a custom built Scorpion MK1 that should look very scale when it's done.
so these are the specs that this build will have:
Traxxas Summit transmission with Leading Edge Dog Carrier installed
Carbon fiber, Aluminum and plastic chassis
1/5 scale axles by RC4WD
1/5 scale beadlock wheels
RC4wd 40 series tires/Pitbull XL tires also
2005 Nylint Body 1/6 scale
Water Proof brushless steering sero by Alturn USA
Led lights front and rear
Servo powered winch
Losi XXL shocks
Brushless motor
Water proof esc
The Kyosho axles just don't look scale! So that said I dropped $513.00 on the Ultimate 1/5 Toyota axles.
Specifications:
Front and Rear Axle
CNC Machined
Billet Aluminum
Gear Ratio: 2.53:1
Hardened Steel Spool Gear (Helical)
8mm Axle Output Shaft
Heavy Duty Differential
XVD (Xtreme Velocity Drive) Axle
Full Ball Bearings
Designed for 1:5 Scale Truck
Output Shaft Length: 0.43in / 11mm
Output Shaft OD: 0.31in / 8mm
Total Width: 15.74in / 400mm
Hex to Hex Width: 14.44in / 367mm
Pin to Pin Width: 14.72in / 374mm
Pumpkin Height: 2.83in / 72mm
Leaf Mount Width: 6.33in / 161mm
Hex Thickness: 0.51in / 13mm
24mm Steel Wheel Hex
Weight: 76.57oz / 2171.5g
Here is some of the work that has been done up till now.
I have 2 of these bodies. So have 2 or 3 ways to go with the builds so I my change the chassis a few times to get the performance that I'm wanting form these builds.
I installed Led lights and cut the crap off the bottom that I feel I will not need.
so these are the specs that this build will have:
Traxxas Summit transmission with Leading Edge Dog Carrier installed
Carbon fiber, Aluminum and plastic chassis
1/5 scale axles by RC4WD
1/5 scale beadlock wheels
RC4wd 40 series tires/Pitbull XL tires also
2005 Nylint Body 1/6 scale
Water Proof brushless steering sero by Alturn USA
Led lights front and rear
Servo powered winch
Losi XXL shocks
Brushless motor
Water proof esc
The Kyosho axles just don't look scale! So that said I dropped $513.00 on the Ultimate 1/5 Toyota axles.
Specifications:
Front and Rear Axle
CNC Machined
Billet Aluminum
Gear Ratio: 2.53:1
Hardened Steel Spool Gear (Helical)
8mm Axle Output Shaft
Heavy Duty Differential
XVD (Xtreme Velocity Drive) Axle
Full Ball Bearings
Designed for 1:5 Scale Truck
Output Shaft Length: 0.43in / 11mm
Output Shaft OD: 0.31in / 8mm
Total Width: 15.74in / 400mm
Hex to Hex Width: 14.44in / 367mm
Pin to Pin Width: 14.72in / 374mm
Pumpkin Height: 2.83in / 72mm
Leaf Mount Width: 6.33in / 161mm
Hex Thickness: 0.51in / 13mm
24mm Steel Wheel Hex
Weight: 76.57oz / 2171.5g
Here is some of the work that has been done up till now.
I have 2 of these bodies. So have 2 or 3 ways to go with the builds so I my change the chassis a few times to get the performance that I'm wanting form these builds.
I installed Led lights and cut the crap off the bottom that I feel I will not need.