Voo's 5T jump truck.

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.
This is where it gets messy,take the Rezzie cap and screw it itno the chamber,the oil will at this point be overflowing from the shock body.
Picture619.webp
Then extend the shock shaft and SLOWLY push it into the shock body to avoid bubbles.
Tighten up all threads hand tight and the jobs done!:cup-1:
Picture622.webp
I adjusted the Rezzie screw until it just touched the piston in the chamber.It will be re-adjusted on a test run for the best setting.

Here are a few pictures of it mounted.
Picture623.webp

Picture624.webp

Reveiw done.
James.
 
love my Ressis. really improve the handleing, and allow for more precise tuning of the suspension.
 
Took the truck out today and was launching it 8-10ft high and about30-40 ft in length and it took it like it was running over a mole hill! No issuses on the landing,it just landed and carried on.
Probably one of the best mods for a 5T to date.
J.
 
Back
Top