Need help picking throttle servo

[funford]

I accidentally left my reciever switch on and burnt my hitec 5645mg.

Should I just replace with the same servo?

thanks guys

 

[Bigger the Better]

For the Baja I use the JR servos. z9100T or Ds8711. Expensive but will lock the standard brake system tight.

 

[funford]

^^^^thanks I will look into those options.

Also just wondering if there are any issues running digital servos with a Futaba 3pdf?

 

[Hyperpete]

I accidentally left my reciever switch on and burnt my hitec 5645mg.

Should I just replace with the same servo?

thanks guys

I swear by the ACE DS1015 servo for throttle/brake duties. Loadsa power and mega quick

 

[Super654]

I swear by the ACE DS1015 servo for throttle/brake duties. Loadsa power and mega quick

+1 Hyper...ACE is very fast.

 

[carlcurtis83]

Savox 1258 TG

0.08 secs and 12kg of torque awesome servo. I run one on my baja and it's been faultless.

 

[Timmahh]

i have a JR Z9100T (had a Z9000t but it went tits up on me ) in one baja and the ACE 1015 in the other, both very good servos.

not sure on your radio, but digital servos should work fine on it.

 

[tonystott]

I just fitted one of these, from Hobby King
http://www.hobbyking.com/hobbyking/...V-767_Digital_HV-2S_Servo_31kg/_.118sec_/_78g
347 oz/in on 6v, 60 degree transit speed 0.145 seconds, dual ball bearing, titanium gears, 2.75oz, only $59.99.

It should be powerful enough! If not, going to 7.4v takes torque up to 430.5 oz/in!!

 

[funford]

I found an Ace S2008MG in my spare parts box, and its getting the job done for now. Also I no longer have servo glitches. I used to get servo glitches with the hitec 5645MG.

I guess the digital servo didn't like my setup?