Search results

Happy Easter, enjoy the days

Hello, this is not an FG car, the only thing from FG are the Stadium Truck tire. For me it looks like an old Rovan car if I remember right.

Hello, the differential with the adjustable locking effect was not intended for the 1/6 scale vehicles from FG. That's why it doesn't fit into the off-road models without the differential increase. These differentials were developed for touring cars, where the increase is installed as standard...

Hello, I hope you will find some on Ebay, the problem is that FG will not produce this rim since years any longer. The rear rim is the bigger problem, because FG has changed the rear Porsche axle into the 1/6 arms from the Marder to use the same rim front and rear. This is the new style...

Hello Roger, the rear axle is no problem but the front will not work because they are different 510/535

You can use 6716/16 and 6734/04 from FG or similar size, the nylon collar is not as a spare part available (but not needed also).

They are also not needed, it´s for show

Hello, the side plates are not needed they are only for show. They are only important for the side body mounts. If you will build the car without the plates you can use left and right on the roll cage part number 7154 from FG the fix the body shell.

Hello, this will work good: https://rc-car-online.de/en/products/jan_2022_25-y19751-tire-tread-cutter-offer-01-22.html

Hello, here https://rc-car-online.de/en-startseite.html you will find all your needed parts. It is the same shop as Hobbythek on Ebay but the parts are cheaper, no Ebay charges ;)

We drive with the Sportsline cars only 4/10 of a second slower than the Competition cars, so in my eyes the Sportsline is also a rce car

The MecaTech spray is a good way to get more grip it´s much more expensive than WD40 but will work very good: https://rc-car-online.de/en/products/clarks_e492012-e492012-magic-rain-magic-grip-tire-adhesives-for-rc-cars-400-ml.html

at the lower end you can use the same screws like before because there the distance is not changed at the front end you will need shorter screws because the plate is 8mm high, use there the same at the rear bulkhead good size is 4,2x16 FG part number 6712/16

Hallo Ash, the ride high is for the front and rear the same, so remove the plate and screw the axle back to the chassis to reduce the angle then it will work much better. If you want you can give me call then I can help you easier by phone, use the rc-car-online phone number and ask for me.

Hello Ash, we drive the Touring car with a ride high of 6- 8mm on a race track are the 6mm better on a parking lot something like that are the 8mm the better choice because it is not so flat like on a track. To adjust the right high you can use a 6 or 8 mm drill lay it under the chassis and then...

Hello Ash, please check the front axle because FG7T2M will use the the wrong parts or better to say a wrong combination on the Challange line cars. If you have under the front bulk heads a separate plate please remove it and screw back the axle onto the chassis to get the right angle. Also...

Was the best evening since a long time, so they can do it every week

Oh, looks a bit damaged

wow they are looking very strong (y)

Wow, cool car you have there, here in Germany we drive a lot of races with the F1 cars it looks very realistic. Have fun with your car.