2 Stacks & an Air Filter

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.

grizzledcamudgen

Senior Member
Messages
251
Reaction score
0
Location
NW Indiana
Howdy ho neighbors,


Could anyone help me with the K&N air filter?


I want to use my K&N! So far now I have bought Two, II, that's 2! :o velocity stacks and neither one works! lol


Is there an angled velocity stack for the K&N, not the HPI shred stack, I have that one but for the K&N? I just bought a straight velocity stack (for K&N) yesterday and it's a no go due to the throttle linkage.


:eek: Help me OBI-WAN KENOBI!
 
hey, I don't want to be the one to burst your bubble, I am not the expert by any stretch...but I don't recall ever seeing a K&N angled on a Ramp.


Also, as great as they are on your quad, the general consensous they are best left for street only driving...they don't do nearly as good of a job as the HPI one on an RC.


IF you plan on not getting it in the dirt much you should be OK but will most likely have to cross linkages.
 
I concur that the K&N will suck in dirt if used as is. Some guys say that if you have an inner filter and run an Outerwares that it will be fine.
 
http://www.davesmotors.com/s.nl;jsessionid=c1V3MYpS1FQQsCZv22LxL0WJqSNkJ0nKstjgtr6GD0T2RBSnMBQxp2z60WfzwHGwZyYdYkQQ5Gq0HypshQW13fVcs1yPZQxLdLQGG1mJpQhD206TgYxBG10yybmKKRJ4!1751332159?c=885035&n=1&it=A&id=6654


this is the filter you were talking about??


catchaser and scaremonger are right they suck if used for offroad you can get a redneck 2-stage, with an outerwears pre-filter for it and it might work for you, i suggest getting the angled shread-stack and using the stock hpi baja filter with a redneck 2-stage and a outerwears pre-filter.
 
Back
Top