32cc vs 30cc

[UrbnRzqr]

Hey all I'm not sure what the power is on these motors. I was luky enough to have an MT equipped with the 32.


Anyone know what the power is on these...

 

[RampageHopUps]

The 30.5 s around 3.5 HP. The 32 should be around 4 to 4.5 HP. No one has put them on a dyno yet.

 

[UrbnRzqr]

Thats a substantial gain! Has Redcat not dyno'd these badboys during development... Kind of odd.

 

[Anthony1989]

There a major difference in acceleration? I order a 32cc rampage and I want it to haul butt is there a better engine out there to get speed out of?

 

[RampageHopUps]

Yes there is a major difference. Any Zenoah engine in the 30.5 to 38cc would perform better.

 

[Anthony1989]

Yes there is a major difference. Any Zenoah engine in the 30.5 to 38cc would perform better.

Okay thx I'll look into them thanks

 

[RampageHopUps]

Davesmotors and OniellBrothersRacing can get you into the 9 HP range

 

[Anthony1989]

Thanks for the help any advice on steering servo and gas and breal servos?

 

[RampageHopUps]

Servos are always personal choice. I use Hitec 5645 for all of my Throttle, and Hitec "discontinued" for my steering. I'm not sure what steering I will get when these finally break down.

 

[Anthony1989]

Servos are always personal choice. I use Hitec 5645 for all of my Throttle, and Hitec "discontinued" for my steering. I'm not sure what steering I will get when these finally break down.

I have a savox on my tmaxx steering works great seen a few people with them in there rampage may try them out.thx for the advice

 

[Anthony1989]

Davesmotors and OniellBrothersRacing can get you into the 9 HP range

I just ordered the 6304 full mod g320rc for my rampage will it fit on perfectly or is there stuff ill need to get to make it fit.....any other tips on increasing power on my rampage mt?

 

[RampageHopUps]

Did you make sure to tell then it was for a Redcat?

 

[RampageHopUps]

And yes it will fit if they use a CY fan cover.

 

[Anthony1989]

Yes I said it was for redcat. Okay sweet super stoked to see the power have cpi exhaust coming aswell. Not sure what else I should upgrade to make a monster.

 

[RampageHopUps]

Belt drive if you can find one.

 

[Anthony1989]

Know any brands that may make them?

 

[RampageHopUps]

eBay from Germany.

 

[OldDirty]

Thinking about a picking up a belt drive to replace the stock gears what's everyone running ? http://www.stern-cnc.de/index.php?page=shop.browse&category_id=44&option=com_virtuemart&Itemid=1

 

[UrbnRzqr]

Whats the advantage of belt drive...

 

[Anthony1989]

Whats the advantage of belt drive...

I believe less slip.but Im new to this so I may be wrong.