32cc won't start

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.
scooby61 said:
It's a killer bee bee but it's bypassed since it's not plugged into the circuit board
Click to expand...
Oh, ok, I thought you just didn't plug it into the receiver but everything else was connected :)
 
Ice_2k said:
He already said he has spark, fuel and also swapped the carb with a known good one.
Click to expand...
He also said he unplugged the killer bee and had spark and u keep telling him killer bee.i stated spark and fuel should start so I know he has that but an air leak can cause a hard or no start....
 
Before u swap engines.take off the intake and check out the pulse port hole maybe blocked also peak into the cylinder never hurts.also I had head bolts loose pretty much out of the box so a few options to check before engine swap but engine swap is pretty easy if you have to go that route....good luck....
 
I would really like to ask how do you have your killer bee hooked up but not hooked to the receiver and you have a spark??? I know anytime my killer be is not plug into the receiver it kills my spark.
 
Finally got it running!! Had to swap coil from my spare motor so now it has a carb swap and a coil swap to get it running. Now to get it broken in and my tuned pipe will be here on friday. And have to full out red cats warranty form.
 
scooby61 said:
Finally got it running!! Had to swap coil from my spare motor so now it has a carb swap and a coil swap to get it running. Now to get it broken in and my tuned pipe will be here on friday. And have to full out red cats warranty form.
Click to expand...
Glad to hear that. Finally.
 
Back
Top