air filter

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.
D

DON 44

Well-Known Member
Messages
88
Reaction score
0
Location
jefferson tx
can somebody tell me exactly what hpi air filter i need and where to get it(part number would be great)...everybody keeps telling me i need a hpi air filter.Well they've got more than 1 type...I've never had a hpi so i don't know what i'm looking for...tell me every thing i need so i don't have to order twice.thanks
 
Last edited by a moderator:
here's a couple to better show the linkage... older pic's.


6-21-09055.webp


6-21-09053.webp


a little newer one, my tt has a few phases...


tt001.webp
 
Last edited by a moderator:
DON 44 said:
Ron e. thanks for the links.. Do i need all three parts to make it work..
Click to expand...
no, the shredstack is not needed, but nice. it makes for more clearance for the throttle/brake linkages. but the pics above show the hpi air filter installed w/o the shredstack that angles the filter upward.


just the first 2 pieces you need. 1) the cage assy and 2) the 2 part foam filters that go over the cage assy. you'll also need good dirt bike foam air filter oil.
 
Get quantity of 2 of item one and quantity of 3 of item 2 on Ron E links that will get you enough for both your cars and a extra filter element to have preoiled up and ready.


The shredstack is nice on baja but not necesary on th e Rampage.
 
I use the standard linkage hookup. I had to trim a little off the edge from the plastic HPI filter top.


The linkage has clearance now and it's using the stock angles. I use the stock servo horn that came


with my Rampage. The mod does not affect filter performance whatsoever.


Check the pic, truck is dirty but you can still see...


1034523.jpg
 
Last edited by a moderator:
Back
Top