Air Filter

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.

Silent_Chaos

Well-Known Member
Messages
901
Reaction score
1
Location
Beirut, Lebanon
I'm currently running the DT1 triple flow with velocity stack on the Xb but I have to rotate it in order not to touch the throttle linkage, it's also making the body be a bit of a tight fit due to the length of the filter.


I just ordered the ADA carb manifold and with the Vstack and that filter, i don't guess it's gona fit anymore..


What is your current air filter setup? Any recommendations? Like the DT1 Dome shaped losi 5ive filter? TGN? Uber? K&N? Or the R2C dotd on ddm?


Thanks
 
I run a dt1 and the a v stack ... Your rite about the linkage but still fit fine under the shell if you take a 10 mm spacer to the front pin. The dome won't fit from what I hear.
 
topblissgt said:
I do too with a outerwears prefilter and its a great setup. As good as any aftermarket setup
+1 on the outerwear

I buy the King Motor ones - less than half the price of others and they do the same job
 
I have never run any prefilters. But Will do so.

I think 13$ for one is way overpriced.. srsly what's the actual cost on the manufacturer? 0.50$??
 
Silent_chaos said:
I have never run any prefilters. But Will do so. I think 13$ for one is way overpriced.. srsly what's the actual cost on the manufacturer? 0.50$??
Yea but they work... till cheaper then better then any aftermarket when used with the stock 2 stage
 
I run a GBE 2 stage oiled filter with modified Throttle linkage.

IMG_8973.jpg
 
you know if your to cheap or to broke to buy outterwears one of your old ladies old sets of pantyhose and a couple rubber bands will do fine to make several prefilters
 
blak__jak said:
you know if your to cheap or to broke to buy outterwears one of your old ladies old sets of pantyhose and a couple rubber bands will do fine to make several prefilters
But rubber bands aren't cheap either ;-)
 
Back
Top