Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
That was it. Adjusting them now.. Thanks!Sprint 77 said:I have seen this if the set screws on the brake pad are out to far. The brake will hang and make you think it is the drivetrain gears.
Seems my issues was that they were vibrating out forcing the lock down on the breaks, I put some blueloctite on'em so we'll see if they'll hold.flint mann said:Sprint stole my thunder lol, I have "seen" that also. My fix was to take the grub screws out and replace them with allen head bolts. There is a problem with this fix though, when the rotors wear down adjustments can only be made by putting in longer allen bolts. I am going to get some longer grub screws and put a nylock nut in front of them locking them in place till adjustments are necessary.
After 20mins with the MT in the dirt I had zero issues with the brakes. Loctite seems to be holding them in there.flint mann said:That was the issue I was having as well I didn't know how well loctite would work becuase the grub screws aren't getting any torque at all just sitting in there basically loose.
Register and gain access to Discussions, Reviews, Tech Tips, How to Articles, and much more - on the largest Large Scale RC community for RC enthusiasts that covers all aspects of the Large Scale RC!
Register Today It's free! This box will disappear once registered!