baja 5b woop's

[387 mudslinger]

last week end i when to the beach here in OR. i run it for 2 tanks and then found what i thought would be more fun to climb the sand hills. woop's that was a mistake .

 

[pup1970]

Not too bad. Lightened fly wheel. If it still blows enough air, I say run it. I would try.

 

[DemonRC1]

Run it anyways. My lightened flywheel has about the same amount of fun. I assuming the fins on the backside are still intact.

 

[Clubin]

2 things you need Recoil outerwears and a Slammerdam. I have had that happen to me with my FG only once.

 

[kryptonite5b]

its defintly lightened. i would be concerned about it being properly balanced. take a good look at it for fractures and if its good just dremel down the high spots. you just might have saved your self $39.00 for a ddm lightened fly wheel

 

[387 mudslinger]

2 things you need Recoil outerwears and a Slammerdam. I have had that happen to me with my FG only once.

I have on outerwear but how sells the slammerdam??

 

[387 mudslinger]

its defintly lightened. i would be concerned about it being properly balanced. take a good look at it for fractures and if its good just dremel down the high spots. you just might have saved your self $39.00 for a ddm lightened fly wheel

I lol i got a motor from,harbor freight, for 60$ its a holbart 26 cc and i picked up a 30 cc for 70$ i just might do that

 

[Clubin]

I have on outerwear but how sells the slammerdam??

DDM sells them, they are worth every penny of 15.00 usd.

 

[kryptonite5b]

I lol i got a motor from,harbor freight, for 60$ its a holbart 26 cc and i picked up a 30 cc for 70$ i just might do that

oops.. whats it for? mounting that should be fun. clutch? is for a chain saw or weed eater.. it will have a rev limiter. send us a link if you can

 

[Piranha2]

DDM sells them, they are worth every penny of 15.00 usd.

http://www.davesmotors.com/s.nl/c.885035/n.1/it.A/id.5918/.f

 

[DemonRC1]

Screen mod works well too. Only costs a $1 too.

 

[387 mudslinger]

oops.. whats it for? mounting that should be fun. clutch? is for a chain saw or weed eater.. it will have a rev limiter. send us a link if you can

woop's weed eaters chang youngs, yes it has the same crank shaft.thinking to swap it's fly wheel with the one in my [ woop's 5b lightened fly wheel] lol.

 

[387 mudslinger]

Screen mod works well too. Only costs a $1 too.

thank you for that tip

 

[387 mudslinger]

Run it anyways. My lightened flywheel has about the same amount of fun. I assuming the fins on the backside are still intact.

lol yes they are and it runs

 

[387 mudslinger]

baja 5b woop's


ok i said that i would post this for you to see.that the end is the flt wheel death run.lol and that is a big rock that it hit.so enjoy my misshap.

 

[387 mudslinger]

cleaning the cooling fins off the fly hweel


ok i found some time to patch this together.i said i'd post it and here it is. enjoy my misshap.lol that is a rock that it hit.http://s951.photobucket.com/albums/ad358/387mudslinger/?action=view&current=thedeathrun.flv

 

[Ron E]

dude, ouch... that hurt.