Baja disc brakes ?

[kaztheminotaur]

Here is one for you guys that do all the custom mod stuff: Do you think these Baja disc brakes could be made to fit either the front or rear hub carriers of the Rampage?


http://integy.com/st_prod.html?p_prodid=6456&p_catid=126


I am contemplating converting by Rampage to brushless by running a pinion to a different spur modded onto the center locked diff. I will be eliminating the gear plate and all the gears and mechanical brakes. Most of the ESCs have brakes but I would like to have some mechanical brakes since this is a lot bigger than a LST2.

 

[lumax]

If you have your motor, try to short all three leads together... you will see how powerful will be your breaking power at 100% brake


If your motor is big enough, that shouldn't be an issue


What motor do you plan to use?

 

[kaztheminotaur]

I will probably use the 750 KV Neu 2215 on 10S.


You think ESC brakes will be enough with this motor?

 

[lumax]

From the spec I have seen on the net this is a 3.3HP (6.7 HP Peak)... 5000W of breaking power that sound good to me, I'm not an expert but I will certainly give it a try... still depend on the ESC ON state resistance for braking

 

[RampageHopUps]

OICU812 used RAMTech front brakes on his Rampage. They worked well from what I read.

 

[kaztheminotaur]

Where can I get the RAMTech kit at?

 

[kryptonite5b]

here is my thread on installing disc brakes.. not very helpfull. cable brakes are a pain in the neck to adjust. its hard to get all 4 wheels to grab even. but i think its worth a shot and would be pretty trick for sure.


http://www.redcatrampageforum.com/showthread.php?t=1627

 

[RampageHopUps]

Where can I get the RAMTech kit at?

I will see if I have a set in the garage. Everyone is sold out as far as I know.