Ball link on front turnbuckle is rubbing inside front wheels

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.
B

Boriqua935

Well-Known Member
Messages
184
Reaction score
0
I straightened the front wheels by making turnbuckles longer. However this has caused turnbuckles to rub inside front wheels and wear down plastic ball link mount. However if I shorten turn buckle it causes wheels to turn out. Any other ideas to resolve this issue?
 
You may not have the same issue because you have the thinner buggy wheels. If I put on 5b wheels there is plenty of clearance
 
I run both, just have the Buggys on cause of the current gearing...Never had rubbing with MT tires either...something's outa wack...
 
Def. I just know how to adjust toe of wheel by turning silver turnbuckle. Any other way to move wheel away from turnbuckle? It's too close
 
sounds like you have the tt hex and not the mt hex i thought they changed and was using the mt hex on both but guess not.
 
MT vs TT hubs


Heres something to check the blue hub in the picture is a MT hub the silver is a TT hub the pic of the scale will be the right measurement


PB230168.webp


PB230171.webp


here's a pic of the hole assembly


PB230170.webp
 
i have the Blue MT one. Measured it. I posted a follow up thread on here. Having some real problems here.
 
Back
Top