Battery charger specs XT/XB

[leetmodz]

Anyone mind writing the specs of your stock hump pack battery charger for xb/xt?


amps,voltage etc... don't need input specs, just output.


Thanks.

 

[cordy]

I use 1.5 amps if battery is 1600 mah,3amps if 2300-3000 mah, and 5 amps if battery is 5000 mah. My charger is an onyx.(duratrax)

 

[leetmodz]

I use 1.5 amps if battery is 1600 mah,3amps if 2300-3000 mah, and 5 amps if battery is 5000 mah. My charger is an onyx.(duratrax)

Thanks for the reply, but I'm looking for the stock wall to plug charger specs written on the back.

I lost my charger, then found what looks to be it, with a tamiya to the red connector but the charger says 9v ???

So Im wondering if the stock charger is a 9v or 6v? I know the batt is 6 but Im sure I have never had another charger like this with the same plug connector.

 

[Deluge1]

For some reason, I still have mine.

Output: 9V DC 250mA

 

[leetmodz]

For some reason, I still have mine.Output: 9V DC 250mA

Thanks for confirming that

not sure why they include a 9v one instead of 6v.

 

[Guest]

not sure why they include a 9v one instead of 6v.

A charger always is a higher voltage then the battery. If the voltages matched the battery would not take a full charge.