battery question

[Ildy666]

Hey guys i purchased a new brushed rock crawler it should be here today.it runs on a 7.2 nmh i have a 2s 7.4 4000 mh lipo battery. can i use that lipo instead i believe i can but want to be sure.i don't want to fry any of the electronics...

 

[chapinb]

More than likely, yes.

Esc that are set up for nimh sometimes cannot handle the amps a lipo can deliver. I don't expect it to be an issue in a crawler. If in doubt, check the manual. It would say no lipo or nimh only if its an issue.

you will not have a low voltage cut off though.

What model is it?

 

[Deluge1]

You can. I've used Lipos on my brushed ESC's without any issues. They don't have an LVC, though. I just used a Lipo voltage alarm and set it to go off at 3.4V.

Something like this:

Hobbyking 2-8S Cell Checker with Low Voltage Alarm

 

[Guest]

Yep, voltage is voltage, it doesn't matter how it is stored.

Like Deluge stated, if you can't program the low voltage cutoff, you will need an alarm. Running your lipos too low will damage them.

 

[Ildy666]

THANX guys i know where to get all the right answers...now only everything was this easy .....

 

[Knuckles]

You just need to make sure the esc comes with a lvc. If not you can get one from Novak and adapt it to your esc. They work good, have one in my summit.