Binding KM KSRC 2.0

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.
DannyLee94

DannyLee94

Member
Messages
5
Reaction score
0
Location
Prescot, Liverpool, UK
Hi all,

I've bought a brand new King Motor KSRC 2.0 yesterday and I was wondering if anyone knew how to bind the transmitter to the receiver as when I turn on the transmitter and then the receiver, the receiver light glows and then dims completely. I then try to turn the transmitter wheel but the car shows no response whatsoever.

It seems that the car needs binding but there are no instructions on how to do so in the instruction manual, so I was wondering if any of you who have had a similar problem may be able to help me?

Thanks
 
DannyLee94 said:
Hi all,

I've bought a brand new King Motor KSRC 2.0 yesterday and I was wondering if anyone knew how to bind the transmitter to the receiver as when I turn on the transmitter and then the receiver, the receiver light glows and then dims completely. I then try to turn the transmitter wheel but the car shows no response whatsoever.

It seems that the car needs binding but there are no instructions on how to do so in the instruction manual, so I was wondering if any of you who have had a similar problem may be able to help me?

Thanks
Click to expand...

Did you get the car from me? Will p.m You my no .give me a call and i will talk you through it.
 
should have come with a lil binding plug, you have to insert in Rx and then perform the Txon Rx on and should bind then
Click to expand...

Yeah we've tried that, but it doesn't matter because MacGregor from R.C Motorz has said that he'd sort it out for us - it's worth saying that they're a great bunch of lads there.
 
Can you please post how to properly bind. Mine came working, but I want to use my spectrum dx3r. I have a plug, and it flashes, but won't bind. Is there a set button I need to hit?
 
JohnBaja said:
Can you please post how to properly bind. Mine came working, but I want to use my spectrum dx3r. I have a plug, and it flashes, but won't bind. Is there a set button I need to hit?
Click to expand...
if you want to bind the spketrum you need to make sure everything is unhooked..first hook the battery to the aux port.then turn on transmitter,and scroll through options untill you see bind,click it so it opens the menu.then put the bind plug in the bind slot on reciever and click button to transmitter to bind..it could take a few seconds to bind..you know it is bound when the green light is solid..if it is still flashing do same as above again..sometimes it takes a time or two..but when green light is solid,take bind plug out..and unhook battery and place it now in the bind spot..and just hook up the rest...done my friend:lol:
 
Back
Top