breakes

[loganvass]

I just ran my DR for the first time.


Should the breakes stop the car right way or just stop the throttle?


How many tank to break in the motor?


Thanks.


Edson

 

[pNoi_d2k1]

2-3 tanks to break-in. Or atleast that's what the guys here say.

 

[racetruck]

Breakin about 2 or 3 tanks


the breaks should be to your liking

 

[chevy1]

With the truck receiver on and your controller on the throttle servo should be at idle position and not engaging the brake as you push the throttle lever forward it should start to apply the brakes I use a spring on my brake linkage to dampine the jolt of braking hard.

 

[loganvass]

how adjust brake in my DR


When I push the trigger forward the car slowly rolls to stop.


Thanks.

 

[lords]

reason why the at least 2 tanks without beating on it,is to lube the inside of the engine


it will lube faster and seat the ring better under less pressure half throttle or less


I know it's hard in the start to not want to push that sucker all the way in..


I run 1 tank 1/2 throttle less oil mix faster lube and just cruse around on and off the throttle...so far for years has beenok for me ...most of the nitro and 2 stroke still look new on the inside,so iknow i am not burning anything up

 

[Ron E]

When I push the trigger forward the car slowly rolls to stop.
Thanks.

your brakes, linkage or radio needs adjusted... my rampage brakes are so strong they'll flip it over forward... i have to adjust them down to about 25% braking power on my radio to make them useable.


check out my linkage set up with fuel tube and a spring...