carb

[Caveman80]

Hi again another issue I'm sure that's been addressed before but today at work took out the mt and noticed the carb was wet and the other day the engine side of pipe is wet also. So the carbs gasket is blue is this paper? Should I just replace it? The exhaust is cpi and I used the stock gasket when put on, is this ok? And then a stall issue after warming up. Then I opened up the tank and released pressure, so ill do the vent mod to . So what mod would be better for someone who's mt rolls a lot?

 

[Deluge1]

Yes, it's paper. I'd replace both the carb and the exhaust gaskets. I don't like reusing gaskets, unless they're meant to be reused.

 

[Caveman80]

Ok so is there abetter gasket or should I stay stock?

 

[Deluge1]

The stock gaskets are good.

 

[Caveman80]

Alrighty then I'll stay stock, order a new exhaust gasket as well thanks deluge

 

[Deluge1]

No problem, dude.

 

[Caveman80]

ok I was on ddm and there is alot of different gaskets, haven't checked any one else yet but what would you use? I have a 30.5 cc engine off of the v3 mt. Thanks Im going to shop on the left now.

 

[racetruck]

here;s a link to the gaskets i have on my carb

http://www.largescalerc.com/zenoahrccycarburetorgasket.aspx

http://www.largescalerc.com/rccyinsulatorgasket.aspx

 

[Caveman80]

Thanks racetruck even though they are inexpensive have to put stuff on hold. My wife crashed my tahoe now have to come up with $600 for deductable. GRRR.