Chimera Body Post Kit

  • Thread starter Thread starter Guest
  • Start date Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.
G

Guest

Guest
All you guys that run Chimeras, know what a PITA it is to remove panels to just turn it on. In my case with the electric version, to charge my sons batteries.


I thought if the screws were replaced with posts, pins could be used instead of screws. This makes removing the side panels much easier. I got with 7075RC to make them. They will up for sale on their site very soon. Should be under $20.


Here they are.


397777D9-259A-4B37-8134-437D913340FD_zpsobfqmkqx.webp


3018D3AB-5BC4-41B2-9395-609A9B78100F_zpsq95m8wxu.webp


FD271E91-30CA-4EC8-B911-C29858F9C7F3_zpspnwsxo2a.webp
 
With the panel mounted. I always add pulls to my pins.

255A1BAB-1BC8-45B7-BC45-FD3F15CA7EA1_zpsuqpyu2h7.jpg


427C8B6F-A4EE-4829-9DE1-F72556A507F0_zpsoklpclbp.jpg


5FF4D100-E27D-444E-9D95-B026679E3D97_zpslxlqfbku.jpg
 
rcgasser said:
What a super great idea!!!! will that work on the gas also?
Yes you just thread these into the screw holes on the cage. Then just open the holes a bit on the body panels.

4B731169-A906-4957-AF96-FE984379BCE0_zpsuijisuap.jpg
 
Ol said:
Thanks for the great write-up. I'll get them on the site ASAPAnd, yes, they will work on the gas one too.
Any more word on these???? I need the rear shock tower and was waiting until you get these on the website as well so I can order.
 
Back
Top