Comparing servos (video)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.
N

nanoali

Well-Known Member
Messages
218
Reaction score
0
1 Hitec 805BB vs 1 Turnigy S8166M vs 2 Turnigy


[ame]

[/ame]
 
Last edited by a moderator:
I have not used on a track yet. but in my imaginary tracks need not anticipate much in the curves. it turns almost on the fly.
 
Do those Turnigy servos fit without much modification? I might want to try


them as backups...Great video, very informative... :)
 
just a ltl modification needed. you mus cut a bit the servo mounting right there.


mediae.jpg
 
nanoali said:
I have not used on a track yet. but in my imaginary tracks need not anticipate much in the curves. it turns almost on the fly.
Click to expand...
yes "almost on the fly",but after the fly theres landing,and when car lands on one front wheel its pretty hard for servo .same effect when there are rocks on track ,even small ones can break servo gears or whole case.and electronics,overshoot, will they last the 30 min race? ;)


more testing:cool:
 
nanoali said:
hey evil they are digital, and performance very well.
Click to expand...
Are you sure? The website doesn't say anything about them being digital.


Does it have it written on the case?
 
that is what the seller told me, i crash the boxes. but i don't mind a lot about digital or analog signal. i don't use it for race and tracks. i use them more than 1 hour and i can sure you here thare is a lot of rocks around. no big jumps. the gears are metallics.


i ordered 2 moore on HK and i think they will be here 10 or 1 days. then i will confirm you what type of motor is it.
 
You can tell by the sound if its digital or not. Digitals hum by design. They don't really have a neutral they just have a holding point around center.
 
I run the same servos in my dunerunner and tt.If you have the aluminum servo mounts your going to have to grind some of the interior mount for clearence for the turnigy servo.The stock gws servo has an rounded edge but the turnigy does not.If you don't the holes to the chassis will not line up .The turnigy servo is going to push the servo mount further apart because of its larger case.
 
hi hamster, im still running them, and they are perfect for me. remember im not a race runner. im just bashing around user.
 
Back
Top