compatible wheel hex nuts

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.
M

mulepic

Well-Known Member
Messages
393
Reaction score
0
Hi guys, I need to make an order from tower and/or amain. I thought I should order some extra wheel hex nuts for when they decide to leave the car in the middle of the track :) Are there any hpi, losi, etc hex nuts compatible w/ the DR? Ideally it'll still use the 23mm socket. Which brings up another question. Is there a wheel wrench of favor?


For example do these HPI's work (a little pricey): http://www.amainhobbies.com/product_info.php/cPath/1_25_1459_358/products_id/28186/n/HPI-24mm-Wheel-Nut-Orange-4


Here's the losi's and they are 23mm which means the same wrench: http://www.amainhobbies.com/product_info.php/cPath/1_25_1451_1984/products_id/214599/n/Losi-23mm-Wheel-Nut-Set-Blue-4


I just don't know if the diameter and tread is the same.
 
Last edited by a moderator:
Just so it's clear, the baja has the same thread but it uses a 24mm wrench whereas the DR uses a 23mm wrench. The losi uses the same wrench but has different thread so it is not compatible. RCDad, let me know if I have that right.
 
Back
Top