converting driveline to 5sc

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.
X

xscrick

Well-Known Member
Messages
405
Reaction score
14
Location
near green bay wi
looking at converting the stock driveshafts etc to 5sc,,, fast lane machine has a nice set of shafts with inner and outer cups with lifetime warranty,,,, I believe all u need to do is install 5sc outer hub carriers and the boots,,, I have a pair coming of hub carriers coming,, tgn has them at 10 bucks a piece almost half everyone else,,,, anything else I would need besides the 5sc boots to do the install?? I believe the 5sc uses stock Baja wheel bearings,, I have a set of 5b fast eddy bearings I am installing
 
Last edited:
k thanks,,, the fast lane machine set already has inner and outer cups with the super duty driveshafts,,, and the outer hubs are coming,, so I just need the 5sc boots and im good to go,, bought the king motor buggy roller to be cheap,,, but got the aftermarket part addiction,,,,so much more aftermarket parts for bajas than my redcat xsc,,,
 
You don't need the sc hubs as the stock 5b hubs will fit too...but if you have a set coming then sound....couldn't fault the hpi sc drive shafts/cups...
 
Back
Top