Cvd loctite process assistance please

[Westsiderkg]

Fellows,

Read through a few threads but could use a bit of guidance from someone who has done this and any pics or diy guides appreciated! Don't want them slipping out. Thanks!

 

[metal finisher]

# 1 Quality Allen drivers. Ok what I do remove set screw degrease take apart cvd find where set screw made Mark in shaft put on safety glasses and take Dremel and make a small flat area on shaft not much tho. Reassemble cvd Put drop of blue locktite on set screw kind wipe off excess put screw back in nice and tight. Now if you take apart always use heat first then take out set screw

 

[Westsiderkg]

Thanks. Do me a favor and snap a pic of the set screw location when you get a chance. Not seeing it.

 

[metal finisher]

Sorry I am moving I have all rc things packed if you bend the joint you will see it