dakar baja support vehicle

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.
hi ya, yes vid tomorrow, havnt posted any vids yet, should be interesting, not gonna go mad with it, just a few runs, wanna wait till its finished and then give it some, down some dusty track like out in the dakar, should make a good vid then :cool2:
 
roofchopper said:
hi ya, yes vid tomorrow, havnt posted any vids yet, should be interesting, not gonna go mad with it, just a few runs, wanna wait till its finished and then give it some, down some dusty track like out in the dakar, should make a good vid then :cool2:
Click to expand...

cool mate can't wait to see it :cool2:
 
jackobyte said:
Like the others i've been following your build and it looks absolutly fab.

Got to get meself some tubing and welder and give this type of project ago, let my imagination go wild.
Click to expand...

Welder???? you cant use a screwdriver! (and a motorbike...PMSL):clown:
J.

Hey Chop,what does it weigh?
J.
 
DSC02464.webp
DSC02465.webp
hi,took her out today in the rain (so no vid , too dodgy with my new camcord) went really well, stuck to the track like glue, neeed to sort susp gerom out and stiffer srings or dual shoxs
weight wise ( are you sitting down) 14.66kg 32.6 lb:helpsmilie:my shoxs
 
it surprising how realistic it looks when the suspension has to work rather than pushing the buggy off the ground, you see so many just bouncing around trying to drive at full speed down the straight were they have wound the springs right up
 
roofchopper said:
it surprising how realistic it looks when the suspension has to work rather than pushing the buggy off the ground, you see so many just bouncing around trying to drive at full speed down the straight were they have wound the springs right up
Click to expand...
Yeah, when I used to use my HPI RS4 Rally I set the suspension up a bit softer than normal so when it was hitting small yumps the wheels were bobbing up and down in the wells....looked great!
J.
 
Mr fabrication extraordinaire! ;)
Have you got anymore 180DEG bends mate? I've got a manifold plus FG Tuned pipe but don't have the 180 for it!
J.
 
Last edited:
hi no sorry, all i had was a knackered hpi baja performance pipe and cut the silencer bit off then joined it to the leopard pipe, hopeing to get out today no rain so far
 
Back
Top